Breeding and slaughtering fine grid cleaning machine

1、 Product Introduction:

Breeding and slaughtering fine grid cleaning machineIt is a water treatment equipment that can continuously and automatically intercept and remove various shaped impurities in fluids, and can be widely used in urban sewage treatment. The water supply industry, power plant inlet, and also serve as front-end screening equipment in wastewater treatment processes for industries such as textiles, food processing, papermaking, and leather. It is currently one of the most advanced solid-liquid screening equipment in China.

2、 Equipment features:
Breeding and slaughtering fine grid cleaning machineThe advantages of this device include high separation efficiency, low power consumption, no noise, and good corrosion resistance. It can ensure continuous and stable operation without human supervision and is equipped with overload safety protection devices. In the event of equipment failure, it will automatically shut down to avoid overloading. This device can adjust the operating interval of the device according to user needs, achieving periodic operation; It can be automatically controlled based on the liquid level difference before and after the grille; And it has manual control function for easy maintenance. Users can choose freely according to different job needs. Due to the reasonable structural design of the device, it has strong self-cleaning ability during operation and will not cause blockage, so the daily maintenance workload is minimal.

1. Equipment and rake specifications: Equipment specifications are divided into GSLY300-3600 types according to machine width dimensions. If the machine width exceeds 1800mm, it will be made into a parallel unit. The clearance of the rake teeth is divided into various specifications such as 1mm, 3mm, 5mm, 10mm, 20mm, 30mm, 40mm, 50mm, etc. The selection is based on the amount of water, lifting height, total solid-liquid separation, and the shape and particle size of the separated material. Different materials are also selected.
2．Grille cleaning machine/mechanical grilleThe standard groove depth of the equipment is 1535mm, which can be extended according to user needs and actual usage conditions. Note: The rotary grid cleaning machine is installed by lifting the entire machine, and no other support is required on both sides of the collection well. As long as two 200 × 250 × 12mm steel plates are pre embedded on the ground, the supporting steel plates on both sides of the rack can be welded together during installation.

3、 Product specifications:

4、 Working principle:

The rotary grid cleaning machine is assembled into a set of rotary grid chains by a rake tooth factory. Driven by the motor reducer, the rake chain rotates in the opposite direction of water flow. When the rake chain is moved to the upper part of the equipment, due to the guidance of the groove wheel and curved rail, relative self-cleaning motion occurs between each set of rake teeth, and the vast majority of solid materials fall down by gravity. The other part relies on the reverse movement of the cleaner to clean up the debris stuck to the rake teeth. According to the direction of water flow, the rake chain is similar to a grille, and the clearance between the rake teeth assembled on the rake chain shaft can be selected according to the usage conditions. When the rake teeth separate solid suspended solids in the fluid, it can ensure smooth flow of water. The entire work process can be continuous or intermittent.

5、 Technical parameters and selection

1. Equipment and rake tooth specifications

The equipment specifications are divided into GSLY300-3600 types according to the machine width size. If the machine width exceeds 1800mm, it will be made into a parallel unit. The clearance of the rake teeth is divided into various specifications such as 1mm, 3mm, 5mm, 10mm, 20mm, 30mm, 40mm, 50mm, etc. The selection is based on the amount of water, lifting height, total solid-liquid separation, and the shape and particle size of the separated material. Different materials are also selected.

2. Equipment length specifications

The standard groove depth of the equipment is 1535mm, which can be extended according to user needs and actual usage conditions.

Note: During installation, the entire machine is lifted and there is no need to set up other supports on both sides of the collection well. As long as two 200 × 250 × 12mm steel plates are pre embedded on the ground, the supporting steel plates on both sides of the rack can be welded together during installation.

Installation Diagram

5、 Ordering Notice:

Ordering needs to specify the required green and environmental protection measuresBar screenThe model specifications, groove depth, groove width, water flow rate, body length, installation angle, rake tooth spacing, frame material, rake tooth material, etc.