Automatic saturated vapor pressure tester

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Automatic Saturation Vapor Pressure Tester (Reid Method) is an analytical instrument used to measure the vapor pressure of gasoline, volatile crude oil, and other volatile petroleum products. The instrument performs saturation vapor pressure measurement according to the following standards.

Product Details

Automatic saturated vapor pressure tester(Redfa)

1、 Overview

1Automatic saturated vapor pressure testerIt is an analytical instrument used to determine the vapor pressure of gasoline, volatile crude oil, and other volatile petroleum products. The instrument is used to measure the saturated vapor pressure according to the following standards: GB/T8017 ASTM D323.

2. Achieve the level of similar foreign products with its design philosophy. All key components are imported, such as sensors, industrial computers, etc., ensuring the accuracy of data and the stability of the instrument.

3. The environmental conditions for the use of the instrument are: ambient temperature of 10-35 ℃, humidity ≤ 85%,

Working power supply AC220V ± 10%, 50Hz.

2、 (Reid method) structural characteristics

1. It is a desktop structure.

2. Embedded computer, single-chip computer, 7-inch color touch screen, fully Chinese operating system, user-friendly interface.

3. High precision imported pressure sensor with a resolution of 0.01KPa. *Complies with the requirements of the new standard GB/T8017-2012, resulting in more accurate results.

4. It can store 2000 test results and can be viewed and printed at any time.

5. Equipped with a fast thermal printer, printing test results is faster.

6. After turning on, the instrument automatically controls the temperature and triggers an alarm when the temperature meets the test requirements. After loading the oil sample, the instrument automatically performs the test and saves the test results.

7. Three test projectiles can simultaneously detect three sets of data or make three parallel samples.

3、 (Red Method) Technical Parameters

Heating rate: from room temperature to 37.8 ℃ ≤ 40 minutes

Ø Automatic alarm prompt when bath temperature reaches 37.8 ℃

Ø Temperature control correction function: Temperature can be corrected

Ø Constant temperature accuracy: ± 0.1 ℃

Ø Continuous working time: 24 hours

Ø Whole machine power: 1800W

Ø Pressure detection method: high-precision imported sensor

Ø Test rounds: 2 rounds

Ø Printer: Thermal printer

Ø Test storage results: 2000 pieces