Automatic saturated vapor pressure tester (Reid method)

Automatic saturated vapor pressure tester (Reid method)

1、 Overview

1. The automatic saturation vapor pressure tester is an analytical instrument used to measure the vapor pressure of gasoline, volatile crude oil, and other volatile petroleum products. The instrument performs saturation vapor pressure measurement according to the following standards: GB/T8017 ASTM D323.

2. The automatic saturated vapor pressure tester has reached the level of similar foreign products with its design concept. All key components are imported, such as sensors, industrial computers, etc., ensuring the accuracy of data and the stability of the instrument.

3. The environmental conditions for the use of the instrument are: ambient temperature of 10-35 ℃, humidity ≤ 85%,

Working power supply AC220V ± 10%, 50Hz.

IIAutomatic saturated vapor pressure tester (Reid method)structural characteristics

1. This instrument has a desktop structure, as shown in the figure.

2Embedded computer, single-chip computer, 7-inch color touch screen, fully Chinese operating system, user-friendly interface.

3. High precision imported pressure sensor with a resolution of 0.01KPa. *Compliant withThe requirements of the new standard GB/T8017-2012,The results are more accurate.

4. Can store 2000 test results, can be viewed and printed at any time.

5. Equipped with a fast thermal printer, printing test results more quickly.

6. After turning on, the instrument automatically controls the temperature and triggers an alarm when the test requirements are met. After loading the oil sample, the instrument automatically performs the test and saves the test results.

7. Three test projectiles can simultaneously detect three sets of data or make three parallel samples.

IIITechnical Specifications

At the bottomHeating rate: from room temperature to 37.8 ℃ ≤ 40 minutes

At the bottomThe bath temperature reached 37.8℃ automatic alarm prompt

At the bottomTemperature control correction function: Temperature can be corrected

At the bottomConstant temperature accuracy: ± 0.1 ℃

At the bottomContinuous working time: 24 hours

At the bottomOverall power: 1800W

At the bottomPressure detection method: high-precision imported sensor

At the bottomTest rounds: 2 rounds

At the bottomprinter:thermal printer

At the bottomExperimental storage results: 2000 pieces

4、 Configuration