Automatic degreasing unit

Product Parameters

Product Principle

The deoiling machine is a large capacity tilting deoiling equipment specially developed according to the production process characteristics of the standard parts factory. It solves the problem that the current standard parts factory needs to deoil a turnover box object in batches due to the small one-time loading of the deoiling machine, and the chlorophytum comosum leaks oil when entering and exiting, which can greatly reduce the labor intensity of workers, improve the labor conditions, reduce environmental pollution and improve the production efficiency. The equipment is novel and simple in structure, high in strength, convenient in use and maintenance, and low in operating cost, and is widely applicable to the production enterprises of standard parts and hardware; The degreaser adopts a low-speed rotation of the degreaser cylinder, with uniform feeding at the upper part to evenly load the object into the degreaser cylinder. Then, it is automatically controlled by a frequency converter, and the degreaser degreaser cylinder runs at low speed, gradually increasing to the working speed. The object with oil is centrifuged at high speed and separated from the oil through the porous degreaser cylinder wall. The separated oil is thrown to the inner wall of the outer cylinder, collected, and discharged to the oil pan through the oil outlet to complete the degreaser process of the object. The machine is suspended on a vibration reduction device composed of four sets of compression springs

Product features

Biscuit degreasing

product structure

Product Usage

1. Regularly check whether the bolts in various parts of the equipment are loose, add lubricating grease regularly, and pay attention to the tension of the drive belt;

2. This equipment is not allowed to be fed in a stationary state, and various inspections are prohibited when it is turned on. If there are any abnormal phenomena, the equipment should be stopped before various inspections and maintenance can be carried out;

3. This equipment should be operated at low speed (2-3 rpm), with uniform feeding to ensure the balance of objects inside the oil drum;

4. Use clean and impurity free hydraulic oil with a viscosity of 15-68CST for the hydraulic system. It is recommended to use N46 hydraulic oil;

After using the system for 100 hours, the hydraulic oil should be replaced, and then every 3000 hours thereafter;

6. No other debris should be piled up around the equipment, and it should be kept clean with sufficient lighting;