Automatic asphalt mixture mixer

Automatic asphalt mixture mixerIntroduction:

It consists of three main parts: heating pot, mixer, and lifting mechanism. The temperature of the heating pot can be set arbitrarily from room temperature to 250 ℃ and automatically controlled. The mixer consists of a mixing head, a motor, and a mixing blade. During operation, the mixing paddle rotates and revolves inside the pot to mix the mixture, and the mixing time is controlled by a timer. The lifting mechanism consists of a motor, a reducer, a screw, and other components, used to lift and lower the mixer. When adding or discharging materials, lower the mixer to a low position; When stirring, raise the mixer to a high position.

Automatic asphalt mixture mixerKey Features:

1. 240 * 128 high-resolution LCD display screen, full LCD display, supporting both Chinese and English interfaces, friendly and intuitive. Humanized interface design and user experience, clear display of all experimental status and information, and screen prompts for operation steps.

2. The expert PID adjustment algorithm achieves a temperature control accuracy of ± 3 ℃. After 40 minutes of temperature control, the temperature control fluctuation is less than ± 1.5 ℃.

3. Built in expert PID self-tuning function. Automatically optimize temperature control parameters * status.

4. The adjustable temperature compensation function of * avoids the phenomenon of low pot temperature caused by temperature measurement points not reflecting the actual temperature.

5. Program controlled mixing, automatically rises and mixes after startup, and automatically descends after mixing is completed. Stop heating the pot halfway down and wait for the operator to use tools to clean up the remaining mixture from the mixing blade. The heating tube will automatically descend after a delay. The instrument operation of this process does not require manual intervention.

6. Oil bath heating, uniform temperature, accurate temperature control. High safety factor.

7. Ball screw lifting component, with low noise and smooth operation.

Technical Specifications:

1. Mixing capacity: 10 liters (20 liters)

2. Heating pot temperature range: room temperature -250 ℃ (any setting)

3. Temperature control accuracy: ± 3 ℃, resolution: 0.3 ℃

4. Mixing time: 1-999 seconds (arbitrarily set)

5. Mixing blade speed: revolution speed of 45 ± 5 revolutions per minute; Rotation 75 ± 5 revolutions per minute

6. Working temperature: -10 ℃~50 ℃

7. Relative humidity at work: not exceeding 80%

8. Power supply voltage: three-phase four wire AC380V ± 10%

9. Total power: 3600W (large)

10. Dimensions: 910 * 595 * 1660 (mm)

11. Gross weight: 300Kg

Shanghai Xiyue Experimental Instrument Co., Ltd.'s product after-sales service commitment: Any product purchased from Shanghai Xiyue Experimental Instrument Co., Ltd. can enjoy a one-year warranty service.