Alien food frying system

Product Parameters

Product Features

1. Made of stainless steel material
2. High degree of automation, capable of continuous operation and automatic temperature control,
3. Intelligent adjustment of frying speed and time
4. Safe and convenient operation, stable and reliable performance, and long equipment lifespan
5. Good frying effect, pure taste, and delicious taste
The mechanical configuration and control of 6. * can always maintain good working condition, not only increasing production but also ensuring stable product quality, color, aroma, and taste
7. The automatic filtration of this machine can greatly extend the service life of frying oil without frequent oil changes. The oil consumed during the frying process is equivalent to the oil absorbed by the product, and the fuel saving efficiency is beyond doubt.
8. The efficient heating system minimizes energy waste and saves a significant amount of energy expenditure
The implementation of continuous operation of this machine has improved unit work efficiency, effectively reduced unit costs, and is also very helpful for labor and management expenses.

Product Principle
The frying machine is divided into three layers of conveyor belts, with the upper layer being the pressure floating conveyor belt, the middle layer being the frying conveyor belt, and the lower layer being the scraper mesh belt. The top layer of the equipment is equipped with a smoke exhaust hood.
Before using the frying machine, please confirm the connection of a 3-phase 4-core wire with a cable area of not less than 120 square meters and a total power of 245kw. There must be a reliable grounding wire.
Thermocouple: The oil fryer thermocouple can automatically control the oil temperature. This device is equipped with three thermocouples inside the oil tank to ensure balanced oil temperature. If the oil temperature is too high, the heating tube will automatically stop working, and if it is below the temperature, the heating tube will automatically heat up.
The circulation pump equipped on the frying machine can achieve temperature balance within the entire fuel tank.
Add fuel volume to
After the equipment is shut down, wait for the oil temperature to drop below 50 degrees before opening the pipeline valve and starting the oil pump until there is no residual oil in the oil tank. (Before opening the pipeline valve, close the return oil pipeline valve first.)
Oil storage tank: The stored oil can only be used to supply oil to the explosion machine and cannot be connected to other equipment
LCD panel: it can design the temperature and time required for the fried product, and call the formula after the design is successful.
product structure

Product usage
Check if all valves of the frying machine are closed → turn on the power (confirm that the hood mesh belt is lowered to the working state) → turn on the heating (there must be oil in the oil tank) → turn on the fan → the oil temperature rises to the temperature → turn on the scraper → turn on the main mesh belt → turn on the circulation pump
Shutdown process:
Turn off the heating → turn off the mesh belt → turn off the circulation pump → until the outlet does not discharge slag outward → turn off the scraper → turn off the fan → until the oil temperature displayed on the monitor is below 50 degrees → turn off the return oil pipeline valve → turn on the oil pump pipeline valve → until there is no residual oil in the oil tank, the smoke hood, pressure floating mesh belt, and main mesh belt can be raised and the power can be cut off to clean up