Alcohol spray lamp combustion test device

SR-1000AAlcohol spray lamp combustion test device

1. Overview:

Alcohol spray lamp combustion test deviceAccording to the testing, inspection, and usage requirements of MT182-88, MT450-1995 "Structure and Technical Requirements for Alcohol Spray Lamp Burners", "Test Methods and Judgment Rules for Flame Retardant and Antistatic Properties of Steel Wire Rope Core Conveyor Belts for Coal Mines", MT914-2008 "Textile Core Flame Retardant Conveyor Belts for Coal Mines", Appendix G, and GB/T3685-2009/ISO340:2004 "Combustion Characteristics Requirements and Test Methods for Conveyor Belts at Laboratory Scale", the alcohol spray lamp and propane gas spray lamp combustion tests are conducted in one box, using a rotating 90 ° locking and positioning method alternately, with manual rotation and positioning selected. Due to the fact that the flame centers of the alcohol and propane sprayers are not on the same horizontal line, temperature measurements are taken separately using two temperature sensors. The digital temperature control meter displays numerical values. The sample fixture uses one support rod and two sets of different fixtures that meet the standard for manual rotation to move in and out. After moving in, the handle bolt is locked.

2、 Technical parameters:

1. Combustion temperature value:

Alcohol spray lamp: 960 ℃± 60 ℃ (melting of 0.71mm copper wire within 5 seconds)

Propane gas spray lamp combustion temperature: 1000 ℃± 20 ℃

2. Reagents:

(1) A mixture of 5% (W) methanol and 95% (W) ethanol

(2) ≥ 95% propane gas

3. Temperature detection display range: 0-1200 ℃

4. Air volume adjustment: 1-3m/min

5. Sample fixture:

2 (1 for alcohol combustion, sample horizontal; 1 for propane combustion, sample vertical)

6. Voltage: AC220V, 50Hz

7. High power consumption: 30W

8. Dimensions: 860 (length) x 700 (width) x 1400 (height)

The company relies on the technological strength, human resources, and other support of Qingdao University of Science and Technology, and has been engaged in research, design, and production of rubber machinery, chemical machinery, and industrial automation control for more than ten years. It has a group of testing and inspection equipment R&D and manufacturing engineers who can meet the needs ofResearch and manufacturing of testing and inspection equipment for various material industries.