Product Categories

Jinghai Xingle Technology (Beijing) Co., Ltd

E-mail
2318782366@qq.com
Phone
18910328335
Address
Room 405, Building 12, No. 50 Chunhe Road, Daxing District, Beijing

Contact Now

A456CNBS/Alcometer 456 Coating Thickness Gauge

NegotiableUpdate on 01/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A456CNBS/Alcometer 456 Coating Thickness Gauge $r $n Easy High 456 raises new standards; Provide reliable coating thickness measurement results to improve work efficiency. There are three different models to choose from for the $r $n Yigao 456. The functions of each instrument continue to increase, from the entry-level 456 B to the advanced 456 T. The $r $n integral instrument is suitable for one handed operation because the large contact surface of the "big foot probe" has better stability in measurement, allowing users to obtain continuous and highly repetitive results.

Product Details

A456CNBS/Hiker 456 Coating Thickness Gauge

Yigao 456 raises new standards; Provide reliable coating thickness measurement results to improve work efficiency.

There are three different models to choose from for the Yigao 456. The functions of each instrument continue to increase, from the entry-level 456 B to the advanced 456 T.

The integral instrument is suitable for one handed operation because the large contact surface of the "big foot probe" has better stability in measurement, allowing users to obtain continuous and highly repetitive results.

The split type provides multiple probes for stronger measurement maneuverability.

Half the inspection time using the Yigao 456 coating thickness gauge with a scanning probe

The scanning probe of the Yigao 456 coating thickness gauge features a highly durable probe cap, which is a revolutionary design that allows users to obtain individual dry film thickness readings or quickly scan large surface areas without damaging the probe or coating.

When combined with the scanning or automatic repeat mode of the Yigao 456 coating thickness gauge, the scanning probe allows users to significantly reduce the dry film thickness inspection time without affecting accuracy

The reading rate is 140 readings per minute, and the YiGao 456 coating thickness gauge comes with a scanning probe, allowing you to inspect more coatings in a shorter amount of time

The main features of the Jig 456 coating thickness gauge are:

E456

Easy to use

Large buttons, easy to operate even with gloves on
Multi language menu settings
High contrast color LCD with automatic rotation function
High and low limit indication signs
Factory calibrated, ready to use upon unpacking

Accurate reading

Measurement accuracy ± 1%
Can be used according to multiple criteria and standards
Thermal stability measurement
Can improve resolution readings for thin coatings
Accurate measurement on smooth, rough, thin surfaces and curved surfaces

e456

Reliable measurement

Strong repeatability and reproducibility
2-year host warranty period
Provide a complete set of traceable inspection certificates
Data combination backup date and time tagging function

sturdy

Sealed, durable, and highly impact resistant
Dustproof and waterproof, with a protection level equivalent to IP64
The monitor has strong scratch resistance and solvent resistance
The structure of the instrument and probe is durable and long-lasting
Suitable for use in harsh environments

e456

efficient

Quick reading: 70+/min, using a scanning probe: 140+/min
Multi calibration memory
Alphabet array identifier
User selectable calibration method
With ElcoMaster®And ElcoMaster®Mobile application compatibility

powerful

Multiple probes can be used interchangeably
USB and Bluetooth®Data output to iPhone † or Android ™ equipment
Can be divided into 2500 groups to store 150000 pieces of data
Capable of measuring coatings with a thickness of up to 31mm (1220mils) on metal substrates

The Importance of Coating Thickness Gauge Calibration

Formal quality systems, such as those described in ISO 9001, require appropriate control, recording, and calibration of coating thickness gauges More and more users are pointing out that the readings taken by the thickness gauge can be traced back to the standard

To test the accuracy of a specific thickness gauge, it is important to have traceable coating thickness standards.

Yigao provides a comprehensive range of certified film sheets and zero adjustment plates to ensure the accuracy of coating thickness gauges

Obtain excellent performance from the Yigao 456 coating thickness gauge, and calibrate the coating thickness gauge to adapt to the application with a precision of ± 1% for optimal use of the instrument This video will guide you through a series of calibration options for both integral and split models

Hiker 456 Coating Thickness Gauge

attachment

monolithic
Range1	Measurement range: 0-1500 μ m (0-60mils)	Accuracy *: ± 1-3% or ± 2.5 μ m (± 0.1mil)
	分辨率: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils)
	Basic type (B)	Standard type (S)	Advanced Type (T)	certificate
Easy to measure the iron based integral instrument of the Elgar Elgar 456	A456CFBI1	A456CFSI1	A456CFTI1	●
Easy to Measure Elgar 456 Non Iron based Integral Instrument	A456CNBI1	See with N2PINIP ™ probe Split type instrument	See with N2PINIP ™ probe Split type instrument	●
Easy to use dual purpose integrated instrument, the Easy to Measure Band 456	A456CFNFBI1	A456CFNFSI1	A456CFNFTI1	●

Range 2	Measurement range: 0-5mm (0-200mils)	Accuracy *: ± 1-3% or ± 20 μ m (± 1.0mil)
	分辨率: 1μm: 0-1mm; 10μm: 1-5mm (0.1mil: 0-50mils; 1mil: 50-200mils)
To achieve higher resolution and accuracy on thin coatings, the Range 2 instrument can be converted to Range 1 mode
	Basic type (B)	Standard type (S)	Advanced Type (T)	certificate
Easy to measure the iron based integral instrument of the Elgar Elgar 456	A456CFBI2	See with F2PINIP ™ probe Split type instrument	See with F2PINIP ™ probe Split type instrument	●

Range3	Measurement range: 0-13mm (0-500mils)	Accuracy *: ± 1-3% or ± 50 μ m (± 2.0mil)
	分辨率: 1μm: 0-2mm; 10μm: 2-13mm (0.1mil: 0-100mils; 1mil: 100-500mils)
	Basic type (B)	Standard type (S)	Advanced Type (T)	certificate
Easy to measure the iron based integral instrument of the Elgar Elgar 456	A456CFBI3	Refer to F3PINIP ™ probe Split type instrument	Refer to F3PINIP ™ probe Split type instrument	●

Split type instrument
	Basic type (B)	Standard type (S)	Advanced Type (T)	certificate
Easy to measure Iron based Split type Instrument	A456CFBS	A456CFSS	A456CFTS	●
Easy to measure non iron based split type instrument	A456CNBS	A456CNSS	A456CNTS	●
Easy to use dual purpose split type instrument, the Easy to Measure Band 456	A456CFNFBS	A456CFNFSS	A456CFNFTS	●
The probe is provided separately

*Take the larger one as the standard
●Provide certificates as a standard.

Product Features		■standard configuration	□can
	Basic type (B)	Standard type (S)	Advanced Type (T)
Fast and accurate reading; More than 70 readings can be read per minute	■	■	■
Repeatable and reproducible measurement data	■	■	■
The menu structure is convenient and easy to understand; More than 30 languages to choose from	■	■	■
Durable, resistant, waterproof, and dustproof; Equivalent to IP64	■	■	■
Bright color screen; Continuous backlight	■	■	■
Scratch resistant and solvent resistant display screen; 2.4-inch (6cm) TFT	■	■	■
Larg's larger buttons ensure that users can easily press accurate keys	■	■	■
Computer USB power supply	■	■	■
With inspection certificate	■	■	■
2-year host warranty period*	■	■	■
Automatically rotate the screen; 0, 90, 180, 270 degree angles	■	■	■
Photosensitive function; Automatically adjust brightness	■	■	■
emergency light	■	■	■
Awakening during sleep	■	■	■
Through ElcoMaster®Software can upgrade instrument software¹	■	■	■
data output	■	■	■
USB connection to computer	■	■	■
Bluetooth®;To the computer, Android™＆iOSǂequipment		■	■
Screen data statistics	■	■	■
Number of readings; η	■	■	■
Average value; x	■	■	■
Standard deviation; σ	■	■	■
Maximum limit; Hi	■	■	■
Small limit value; Lo	■	■	■
Coefficient of variation; CV%	■	■	■
Easy to measure the predetermined value of the Elg equipment in square meters; EIV	■	■	■
Nominal dry film thickness; NDFT		■	■
IMO PSPC standard; %>NDFT、%>90<NDFT、 90:10 Test Passed/Test Failed		■	■
Setting of high and low limit values; Can set sound/screen alarm		■	■
Number of data above the upper limit;		■	■
Number of data below the minimum limit;		■	■
Real time reading trend chart; Data group mode		■	■
ElcoMaster®Software&USB cable □	□	■	■
Replaceable screensaver stickers	□	■	■
protective case	■	■	■
plastic carrying case	□	□	■
Integrated instrument with automatic power on function	■	■	■
Probe type; Iron based (F), Non iron based (N), Dual use (FNF) ³	F, N, FNF	F, N, FNF	F, N, FNF
measurement range	0-13mm 0-500mils	0-1500μm 0-60mils	0-1500μm 0-60mils
Split type models with automatic probe recognition function	■	■	■
Probe type; Iron based (F), Non iron based (N), Dual use (FNF) ³	F, N, FNF	F, N, FNF	F, N, FNF
measurement range	0-31mm 0-1220mils	0-31mm 0-1220mils	0-31mm 0-1220mils
Screen display calibration prompt; (More than 30 languages)	■	■	■
Multiple calibration methods	■	■	■
Factory calibration; Resettable to factory calibration	■	■	■
Two-point calibration; Used for smooth and rough surfaces	■	■	■
Single point calibration; zero point calibration	■	■	■
Zero offset4Calibrate according to ISO19840 standard		■	■
Preset calibration and measurement modes		■	■
ISO、SSPC PA2、 Swedish and Australian standards		■	■
Automatic calibration; Used for rapid calibration		■	■
Calibration memory type; Instrument Memory (g) or Instrument and Data Group Memory (GB)	g	gb	gb
Number of data groups; With specific calibration		1	2,500
Calibration memory; 3 user programming memory methods			■
Warning for measuring beyond calibration range			■
Calibration locking; Optional PIN code unlocking	■	■	■
Delete the next reading	■	■	■
Instrument memory; Number of memorable readings	The last 5	1,500	150,000
Single data group calibration; Through ElcoMaster®Software transfer to computer	■	■	■
Limit value; User defined pass/fail sound and screen alarms	■	■	■
Instrument (g) limits and Instrument and Data Group (GB) limits		g	gb
Date and timestamp		■	■
Data group type; Standards, calculating the average value IMO PSPC		■	■
NAVSEA mode			■
Data group replay image			■
Review/Clear/Delete Data Groups		■	■
Copy data set and calibration settings			■
Naming data sets using a combination of letters and numbers; Users can set their own settings			■
Scanning and automatic repeat mode; Connect with scanning probe			■
Fixed pattern for the number of data in the data group; Equipped with data group linking function			■

*The XG 456 comes with a free extended warranty up to 2 years from the date of purchase, up to 60 days. The Jig 456 probe comes with a 1-year warranty

1Internet connection required

Visit the SDK to learn how YiGao MFi certified products can be integrated into your application.

2The predetermined values of the Easy High Index are used in the automotive industry to evaluate the overall quality of coatings. US number: US7606671B2

3Dual purpose probe *: United States: 5886522

4Zero offset, US number: US6243661

Technical Specifications
display information	2.4 "(6 cm) QVGA color thin-film transistor display screen, 320x240 pixels
Battery Type	2 AA batteries, rechargeable batteries can also be used
battery life	With 1 reading per second, it can work continuously for 24 hours5
Instrument dimensions (height x width x length)	141 x 73 x 37mm (5.55 x 2.87 x 1.46')
Instrument weight	161g (5.68oz) including battery weight
Operating temperature	-10 to 50 ° C (14 to 122 ° F)
Packing List	Easy to measure, including the Elgo 456 mainframe, calibration film (only available as a whole), wristband, carrying case (advanced), protective cover (basic, standard, advanced), one screensaver (standard, advanced), 2 AA batteries Operation manual, USB cable (standard, advanced), and Yigao software (standard, advanced).

5Using default settings and lithium batteries, alkaline or rechargeable batteries may vary

standard:
AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499,ASTM D 1186-B, ASTM D 1400,ASTM D 7091, ASTM E 376, ASTM G 12,BS 3900-C5-6B,
BS 3900-C5-6A, BS 5411-11, BS 5411-3,BS 5599,DIN 50981, DIN 50984, ECCA T1,EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461,
ISO 19840, ISO 2063, ISO 2178, ISO 2360,ISO 2808-6A, ISO 2808-6B,ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124,SS 184159,
SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

Gray is a standard that has been replaced but is still recognized in some industries.

Hiker 456 Coating Thickness Gauge

Technical Specifications

	Giant Hand Probe Cover Suitable for placing probes on flat or curved surfaces to obtain measurement results. Place the probe into the giant hand probe cover for measurement - suitable for wearing gloves Suitable for flat probes with a range of 1 or 2 on the Elg 456.
	F and N-type probes	FNF type probe
	T9997766-	T99913225	Giant Hand Probe Cover
	V-shaped probe adapter Suitable for placing probes on medium or large diameter surfaces, such as pipes and cylinders, to obtain readings Suitable for flat probes with a range of 1 or 2 on the Elg 456.
	F and N-type probes	FNF type probe
	T9997381-	T99913133	V-shaped probe adapter
	Backup protective cover for ultrasound/scanning probe Durable - Scan probe protective covers over 50 kilometers (30 miles) away during smooth surface testing - each protective cover can be clipped onto the end of the ultrasound/scanning probe, greatly extending the probe's lifespan.
	FNF type probe
	T456C23956	Spare protective cover for ultrasound/scanning probe (3/pack)
	Probe fixing fixture The fixed fixture of the Jig probe has repeatability and accuracy, making it an ideal accessory for measuring coatings on small or complex components.
	T95012880	Probe fixing fixture
	The probe fixing fixture comes with a probe housing to accommodate a straight probe with a range of 1 or 2
	T95013028	Workpiece pliers
	T95012888	Connection release device - suitable for remote measurement
	T95015961	FNF probe adapter
	T95016896	Micro probe adapter
	Calibration film/coating standard/zeroing plate We offer a range of single sheet films, film kits, coating thickness standards, and zero adjustment plates to ensure maximum possible accuracy.
	Data output controller The purpose is to control an automated production line by outputting data from the ISO 456 RS232 port. The Engel software support team or users can create customized software to utilize output data from 456 meters for remote triggering of pass/fail criteria processes.
	T99925387	Jig Data Output Controller
	Operating temperature	0 To50°C (32°FTo122°F)
	data input	USB
	data output	1 RS232 serial port output through 9-pin D-type connector
	power supply	Requires a 5V 1A (small) DC power supply through a mini USB interface. The external power adapter provides interchangeable UK/EU/US/Australian pins.
	Packing List	Ultrasonic data output controller, USB to RS232 converter lead, power supply (4 interchangeable pins)

T99922341	Screen saver (x10)
T99921325	USB line
T45622371	Desktop detection base - suitable for split type instruments