-
E-mail
13944903695@139.com
-
Phone
13944903695
-
Address
1599-1 Kaiyun Street, Chaoyang District, Changchun City, Jilin Province
Product Categories
- Film punching machine
- Plastic ball indentation hardness tester
- Microcomputer controlled voltage breakdown tester
- Glass lifter performance durability test bench
- Automotive door handle fatigue testing machine
- Automotive door panel fatigue testing machine
- Microcomputer controlled door panel deformation strength testing bench
- Automotive functional test bench
- Automotive B-pillar fatigue testing machine
- Universal prototype machine
- Rocker switch test bench
Jilin Taihe Testing Machine Co., Ltd
*Prototype making machine
NegotiableUpdate on 02/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This machine is used to process standard samples for impact, tensile, compression, thermal performance testing of non-metallic materials such as plastics and organic glass. Capable of cutting, milling notches, milling curved lines and flat surfaces. At the same time, a cooling circulation system was set up. Its main structure is divided into three parts. 〈br〉〈br〉
Product Details
| Plastic ball indentation hardness tester | Microcomputer controlled electronic testing machine | Hot deformation Vicat temperature tester | Cantilever beam mechanical impact testing machine |
| Microcomputer controlled dart impact testing machine | fallBall impact tester | Drop hammer impact testing machine | Microcomputer controlled voltage breakdown tester |
| Hydraulic testing machine | Melt flow rate tester | Film punching machine | notching sample machine |
| Thin film impact testing machine | Microcomputer controlled electronic tensile testing machine | Dart impact testing machine | Mechanical simply supported beam impact testing machine |
| Mechanical simple suspension combined impact testing machine | Microcomputer controlled electronic bending testing machine | Microcomputer controlled memory impact testing machine | Microcomputer controlled electronic testing machine |
| LCD simply supported beam impact testing machine | LCD simple suspensionimpact testing machine | microcomputerMobile phone tensile and compressive testing machine | LCD simple suspensionimpact testing machine |
| Microcomputer controlled electronic tensile testing machine | Microcomputer controlled drop hammer impact testing machine | Microcomputer controlled thin film impact testing machine | *Prototype making machine |
| Thermal deformation Vicat Martin heat resistance tester | Microcomputer controlled Martin heat resistance tester | Plastic ball indentation hardness tester | |
TWZY-24 * Prototype
1、 Equipment usage:
This machine is used to process standard samples for impact, tensile, compression, thermal performance testing of non-metallic materials such as plastics and organic glass. Capable of cutting, milling notches, milling curved lines and flat surfaces. At the same time, a cooling circulation system was set up. Its main structure is divided into three parts.
They are respectively A: milling dumbbell shaped and flat parts. B: Cut off some parts. C: Milling notch section
2、 Main technical parameters:
1. Maximum cutting width: 300mm
2、zui 大切断厚度： 15mm
3. Zui milling plane length: 300mm
4. Cutting milling cutter (grinding wheel) specification: 200 × 32 × 2mm
5. Cutting tool length for milling notches: 50mm
6. Specification of cutting tools for processing dumbbell shapes and flat surfaces: 30 × 12 × 30mm
7. Overall dimensions of the machine: 1130 × 720 × 950mm
8. Main spindle speed of each part:
Cutting off part of the spindle speed: 1400-2800r/min
Milling notch section spindle speed: 400r/min
Spindle speed for milling dumbbell shaped and flat parts:
低速： 940r/min.470r/min
高速： 1430r/min.715r/min
9. Motor power:
Milling notch motor: 550W
Milling plane and dumbbell shaped motor: 0.8-1.3kw
Cut off motor: 0.8 kW
Cooling oil pump motor: 60W
Milling plane and dumbbell shaped automatic feed motor: 60W
3、 Standard configuration
One host
Relying on template style one
Two spindle pads
Hexagonal wrench with 4mm, 5mm, 6mm each
A dumbbell shaped flat cutting tool with dimensions of 30 × 12 × 30mm is used for processing
Three notch milling tools with dimensions of 6 × 6 × 50mm
Three waterproof barriers
Dumb hands, two hands
Adjust the pad iron 200 × 24 × 4 one piece
200 x 18 x 8 per piece
200 x 18 x 11 per piece
One grinding wheel for cutting
A milling cutter for cutting
One piece in the middle
One attachment box
Related product links:
