Labom static pressure level gauge CV3110 provides convenience for level measurement
Labom static pressure level gauge CV3110Good stability and high accuracy, the immersion type liquid level transmitter can be directly inserted into the measured medium, making installation and use quite convenient. The Labom static pressure level gauge CV3110 has a solid-state structure, no moving parts, high reliability, and a long service life. It can measure with high precision from water and oil to viscous paste, and is not affected by the foaming, deposition, and electrical characteristics of the measured medium. It has a wide range of temperature compensation.
The Labom static pressure level gauge CV3110 is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output. The sensor part of the Labom static pressure level gauge CV3110 can be directly inserted into the liquid, and the transmitter part can be fixed with a flange or bracket, making installation and use extremely convenient.
The Labom static pressure level gauge CV3110 is a submersible level sensor that measures the liquid level based on the principle of static pressure. The Labom static pressure level gauge CV3110 measures the liquid level by measuring the static pressure generated by the liquid level height. P=density · gh, and h can be calculated by measuring p, which actually converts liquid level measurement into pressure measurement.
The static pressure of the liquid medium in the Labom static pressure level gauge CV3110 directly acts on the sensing diaphragm, and the static pressure is proportional to the height of the measured liquid. The static pressure generated by the liquid level causes displacement of the measuring diaphragm. Normal pressure causes displacement of the diaphragm by 0.025mm, and the capacitance generated by the displacement of the diaphragm changes. It is detected, amplified, and converted into a standard signal output by an electronic component directly connected to it.Labom static pressure level gauge CV3110It is a static pressure two-wire level transmitter installed on the top of the tested container. The Labom static pressure level gauge CV3110 is easy to install and calibrate, and does not require the tank to be emptied during installation.
The Labom static pressure level gauge CV3110 is widely used for measuring liquid levels at atmospheric pressure. The circuit is encapsulated at the top of the measured container and separated from the measured liquid, increasing its reliability and safety. In addition, the gas collector is designed with temperature compensation and anti fouling treatment, which can effectively prevent blockage and scaling. This function, as well as the independent adjustment of zero and range, makes this product an excellent liquid level transmitter. The working principle of the Labom static pressure level gauge CV3110 is that this level gauge uses head static pressure to measure the liquid level. It converts this pressure into a 4-20mA signal output proportionally. The Labom static pressure level gauge CV3110 mainly consists of four parts: collector, pressure pipe, connecting body, and internally packaged differential pressure sensor.
The Labom static pressure level gauge CV3110 is suitable for measuring the liquid level of various media in systems and industries such as petrochemicals, metallurgy, power, pharmaceuticals, water supply and drainage, and environmental protection.Labom static pressure level gauge CV3110The exquisite structure, simple calibration, and flexible installation method provide convenience for users to easily use. Standard signal output modes such as 4-20mA, 0-5V, 0-10mA, etc. can be selected by users according to their needs.
