The salt spray test chamber does not spray and cannot suck up salt water. Solution

The salt spray test chamber uses salt spray corrosion to test the reliability of the corrosion resistance of the tested samples. Salt spray refers to the dispersion system composed of tiny salt droplets in the atmosphere, which is one of the three prevention series in artificial environments. Many enterprise products need to simulate the destructive effects of the surrounding ocean climate on the products, so the salt spray test chamber should be operated. The salt spray test is divided into two types: neutral salt spray and acidic salt spray. The difference lies in the standards and test methods they comply with, namely the "NSS" and "CASS" tests, which are the most common testing methods in artificial weather conditions.

Mainly focus on the following points:

Is the nozzle blocked,

2. Whether the air pressure is normal (it is necessary to confirm whether the air pipe of the saturation tank is blocked, and this item can be checked by opening the cover and spray to see whether there is saturated air coming out of the nozzle air pipe end)

3. Check if the glass filter (located in the storage tank below the spray tower) is clogged,

The above is for reference only. If you have any questions, please feel free to inquire at any time!