The water jacket of the water-resistant incubator is made of stainless steel argon arc welding, which is durable and long-lasting. The water-resistant heating method ensures uniform temperature and can maintain a constant temperature for a long time even after power failure. However, there may be some wear and dirt problems during use, which will have a certain impact on the performance of the instrument. Therefore, the daily maintenance of the product is essential. It is a necessary equipment for storage of bacterial strains, biological cultivation, life science research, etc. in colleges and universities, biology, agriculture, food, health quarantine, scientific research and other departments.

A digital microcomputer controller with a timed function for a water-resistant incubator. When the temperature inside the incubator exceeds the set value or the water level in the water jacket is too high or too low, an automatic light alarm will be triggered, and heating will stop at the same time when the water level is low. The water jacket heating method has a dual door structure, motor control switch, and when the inner glass door is opened, the breeze circulation and heating will automatically stop without overshoot.

Notes:

When opening the packaging box, the appearance of the equipment should be checked for any damage. If there is any damage, please contact our company immediately;

2. It should be placed indoors with good ventilation conditions, and flammable and explosive materials should not be placed around it;

3. The outer shell of the box must be effectively grounded to ensure safe use;

4. Do not place items inside the box too tightly or too heavy, and leave space around to facilitate the circulation of hot air and prevent damage to the shelves;

5. The incubator does not have explosion-proof devices and cannot contain flammable and explosive materials;

6. The inside and outside of the incubator should be kept clean regularly. If not in use, the water in the water jacket should be drained, and neutral grease or Vaseline should be applied to the plated parts to prevent corrosion. A plastic dust cover should be placed outside the incubator, and the incubator should be placed in a dry room to prevent damage to the temperature controller caused by moisture;

7. When the ambient temperature is high in summer and the set temperature is below 40 ℃, "air conditioning" should be used to lower the ambient temperature and maintain it between (25-28) ℃ (this temperature must be maintained at night) to avoid causing temperature control and static deviation.

During the cultivation process, if the relative humidity inside the box is found to be insufficient, a water tray can be placed and allowed to evaporate naturally, usually reaching around 90% RH;