current probe

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The current probe does not require the insertion of parallel shunt circuits in the circuit to accurately and reliably measure current, but is based on Hall effect and transformer technology. It is an ideal tool for accurately measuring AC, DC, and pulse currents.

Product Details

current probe

LeCroycurrent probeThere is no need to insert parallel shunt circuits in the circuit to accurately and reliably measure current, but rather based on Hall effect and transformer technology. The Lico current probe is an ideal tool for accurately measuring AC, DC, and pulse currents.

Product Model

CP030-30A, 50MHz current probe

CP031-30A, 100MHz current probe

CP150-150 A, 10 MHz current probe - AC/DC, 150 A rms, 500 A peak pulse

CP500-500 A, 2 MHz current probe - AC/DC, 500 A rms, 700 A peak pulse

DCS015-Offset calibration source for AP015

Product Overview

Measure AC and DC currents

Lico current probeThere is no need to insert parallel shunt circuits in the circuit to accurately and reliably measure current, but rather based on Hall effect and transformer technology. The Lico current probe is an ideal tool for accurately measuring AC, DC, and pulse currents.

Perfect integration with oscilloscope

manycurrent probeExternal power supply and amplifier are required to display waveforms on the oscilloscope. All current probes of Lico are powered directly through the ProBus interface, without the need for additional hardware. In addition to power supply, the oscilloscope communicates with the current probe through ProBus, allowing the current waveform to be automatically displayed on the oscilloscope in ampere units. The calculated power waveform can also be displayed in watts. Similarly, demagnetization and automatic zero calibration can be completed with just one click operation on the oscilloscope.

application

Various models of Licocurrent probeCapable of meeting various application requirements. This series of current probes has a bandwidth of up to 100MHz, a peak current of 700A, and a sensitivity of 10mA/div. Multiple current probes can be used simultaneously to meet the measurement requirements of three-phase systems, and current probes can also be used in conjunction with voltage probes to achieve accurate measurement of instantaneous power. Lico current probes are also commonly used for measuring switch power supplies, motor drives, electric vehicles, and UPS power supplies.

model	Large continuous input current	High peak current	bandwidth	Small sensitivity	coupling method	Large size (diameter) of the tested conductor	Oscilloscope interface
CP030	30A	50A <10µs	50 MHZ	20mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
CP031	30A	50A <10µs	100 MHZ	20mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
CP150	150 A	500 A <30 µs	10 MHz	200 mA/div	AC, DC, GND	20 mm	Probus, 1MΩ only
CP500	500 A	700 A	2 MHz	200 mA/div	AC, DC, GND	20 mm	Probus, 1MΩ only