ZS50-32-160 stainless steel horizontal single-stage single suction pipeline centrifugal pump

1、 Introduction:

The Gongbo brand ZS stainless steel horizontal single-stage centrifugal pump is made using processes such as stainless steel plate stamping, expansion welding, etc. It is a new generation centrifugal pump in China, which can replace traditional IS pumps and general corrosion-resistant pumps. It has the characteristics of beautiful appearance, lightweight structure, high efficiency and energy saving, durability, light corrosion resistance, low noise, etc.

IIZS50-32-160 stainless steel horizontal single-stage single suction pipeline centrifugal pumpModel meaning:

Z S 65 —50 — 200 — 11.0
││││└ - Motor power (kW)
│││󧳴-- nominal diameter of impeller (mm)
│││└-- -- Discharge outlet diameter (mm)
││└────────吸入口直径 （mm）
│└------------- Extended shaft (mm)
└------------ Stainless steel horizontal single-stage centrifugal pump

3、 Gongbo BrandZS50-32-160 stainless steel horizontal single-stage single suction pipeline centrifugal pumpApplication:

The Gongbo brand ZS stainless steel horizontal single-stage centrifugal pump is a versatile product with a wide range of applications. It can transport various media, including water or industrial liquids, and is suitable for different temperature, flow rate, and pressure ranges. Its typical applications mainly include the following aspects:
Water supply: filtration, transportation, and zoning of water supply by the water plant, as well as main pipeline pressurization;
Industrial pressurization: process water system, cleaning system;
Industrial liquid transportation: boiler feedwater, condensing system, cooling and air conditioning system, machine tool matching, acid-base transportation;
Water treatment: distillation systems or separators, swimming pools, etc;
Irrigation of farmland, petrochemicals, medicine and health, etc.

4、 Installation conditions:

The ZS stainless steel horizontal single-stage centrifugal pump is a pump shaft direct connection type, consisting of a pump, a pump shaft, and a standard motor:
1) The pump should be installed in a ventilated and anti freezing place;
2) The installation of the pump should ensure that it is not affected by the tension of the system pipeline during use;
3) If the pump is installed outdoors, a suitable cover must be provided to prevent electrical components from entering water or condensing;
4) In order to facilitate inspection and maintenance, sufficient space must be left around the unit;
5) The electrical wiring device should ensure that the pump is not damaged by phase loss, unstable voltage, leakage, and overload;
6) The pump should be installed horizontally on the base, with the horizontal direction being the pump's suction port and the vertical direction being the pump's discharge port.

5、 Operating conditions:

Clean, thin, non flammable and non explosive liquid that does not contain solid particles and fibers;
Liquids with temperatures between -20 ℃ and+100 ℃;
Environmental temperature+40 ℃;
At an altitude of 1000 meters;
The system pressure is 10 bar.

6、 Motor:

The motor is a fully enclosed, air-cooled standard motor with two poles;
Protection level: IP55;
Insulation grade: F;
Standard voltage: 50Hz 1 × 220V
3×380V

7、 Performance parameters of ZS stainless steel horizontal single-stage centrifugal pump from Shanghai Huatong Group Boyang Pump Factory: