Welcome Customer !

Membership

Help

Wuxi Jiuying Environmental Testing Equipment Co., Ltd
Custom manufacturer

Main Products:

mechb2b>Products
Product Categories

Wuxi Jiuying Environmental Testing Equipment Co., Ltd

  • E-mail

    Wxjiuying@wxjyhjsb.com

  • Phone

    13915282125

  • Address

    Building 11, Hengfeng Petrochemical, Block B, Ganlu Industrial Park, Ehu Town, Xishan District, Wuxi City

Contact Now

Xenon lamp aging test chamber

NegotiableUpdate on 01/21
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Xenon lamp aging test chamber is a device that simulates and strengthens the aging damage caused by environmental factors such as solar radiation, temperature, humidity, condensation, and rain in natural climate, observes and analyzes the changes of non-metallic materials, organic materials (paint, coatings, rubber, plastics), etc. This test chamber is used to conduct experiments on the effects of ground solar radiation on equipment and components, simulating the environment

Product Details

Xenon lamp aging test chamberThe model and performance

model

SN-500 (air-cooled type)

SN-900 (water-cooled type)

studio dimensionsD×W×H

500*760*500

950*950*850

outer dimensionsD×W×H

1030*1090*1640

1440*1260*2060

performance metrics

blackboard temperature

63℃~100℃±3℃

humidity range

50%~98% R.H

rainfall duration

1~9999min, Continuous rainfall adjustable

Rainfall cycle

1~240min, Interval (interval) rainfall adjustable

rainwater pressure

0.12~0.15Mpa

Xenon lamp power

1.8KW x 3=5.4 KW

Temperature and humidity operation control system

Time controller

Imported programmable time computer integrated controller

heating system

Independent system, nickel chromium alloy electric heating heater

humidification system

External isolated, all stainless steel shallow surface evaporative humidifier

blackboard temperature

Bimetallic blackboard thermometer

water supply system

The humidification water supply adopts automatic control, and the xenon lamp cooling circulating water is used

Temperature Controller

Imported microcomputer temperature and humidity integrated controller

circulatory system

Temperature resistant and low-noise air conditioning motor, multi blade centrifugal fan

Xenon lamp aging test chamberEnvironmental conditions for use:

  • The ground is flat, well ventilated, and free of flammable, explosive, corrosive gases and dust
  • There is no strong electromagnetic radiation source nearby
  • There is a drainage floor drain near the equipment (within 2 meters of the refrigeration unit)
  • Leave appropriate maintenance space around the equipment
  • Temperature: 5 ℃~30 ℃
  • Relative humidity: ≤ 85% RH
  • Air pressure: 86-106kpa
  • Power supply: 380V ± 10%, 50Hz ± 1%, three-phase five wire system
  • Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must be independent and dedicated for the use of this equipment
  • When the equipment is not working, the ambient temperature should be kept within+0-45 ℃. When the ambient temperature is below 0 ℃, the water remaining in the equipment should be discharged completely

PrecautionsThis device cannot be used to test or store items containing flammable, explosive, or volatile or corrosive gases.