XZ-0142 Multi parameter Water Quality Tester (42 items)

1、 Product Overview

The XZ-0142 multi parameter water quality analysis tester can be used to determine turbidity, chromaticity, suspended solids, residual chlorine, total chlorine, compound chlorine, chlorine dioxide, dissolved oxygen, ammonia nitrogen (calculated as N), nitrite (calculated as N), chromium, iron, manganese, copper, nickel, zinc, sulfate, phosphate, nitrate nitrogen, fluoride, anionic detergent, ozone and other parameters in drinking water. At the same time, four blanks are reserved for users, and users can calibrate and use them in percentage form according to their own requirements, providing convenience for customers. This instrument can be widely used in water plants, food, chemical, metallurgical, environmental protection, and pharmaceutical industries.

2、 Performance characteristics

1. Time saving, each parameter detection takes less than 1 hour.

2. It can automatically zero and calibrate from 1 to 5 points.

3. Standard optical glass sample slots have stronger interchangeability.

5. Using semiconductor light emitters, the light source is stable and has a long lifespan.

6.999 measurement storage function.

7. Date display function, storing one date and time at a time for easy querying.

8. Experimental results can be printed.

9. Full Chinese menu, easy to operate and understand

3、 Technical parameters

Number display measurement range corresponding to reagent resolution indication error

1 residual chlorine 0~2.50mg/L residual chlorine reagent 0.01mg/L ± 5% Fs

2 总氯 0~10.00mg/L 0.01mg/L ±5%Fs

3 low chromaticity 0~100.00CU without reagent 0.01PCU ± 5% Fs

4 high chromaticity 0~500.00CU 0.01PCU ± 5% Fs

5 高氨氮 0~10.00mg/L Ⅰ、Ⅱ 0.01mg/L ±5%Fs

6 low ammonia nitrogen 0~50.00mg/L 0.01mg/L ± 5% Fs

7 磷酸盐 0~2.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

8 溶解氧 0~12.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

9 铬 0~0.50mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

10 锰 0~0.50mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

11 铁 5.00~5.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

12 Iron 0.80-0.80mg/L 0.01mg/L ± 5% Fs

13 铜 0~2.00mg/L Ⅰ、Ⅱ 0.01mg/L ±5%Fs

14 镍 0~1.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

15 镍 2.00~2.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

16 锌 0~3.00mg/L Ⅰ、Ⅱ 0.01mg/L ±5%Fs

17 DPD total chlorine 0-2.50mg/L DPD total chlorine, 0.01mg/L ± 5% Fs

Residual chlorine reagent

18 turbidity 10000~1000NTU without reagent 0.01 NTU ± 5% Fs

19 turbidity 200~20.00NTU 0.01 NTU ± 5% Fs

20 DPD residual chlorine 0-2.50mg/L DPD residual chlorine reagent 0.01mg/L ± 5% Fs

21 low suspended solids 0~200.00ppm do not require reagents 0.01 ppm ± 5% Fs

22 high suspended solids 0~500.00ppm 0.01 ppm ± 5% Fs

23 Chlorine Dioxide 0~2.00mg/L Chlorine Dioxide Reagent 0.01mg/L ± 5% Fs

24 Nitrite Nitrogen 0-0.30mg/L (1), (2) 0.01mg/L ± 5% Fs

25 硫酸盐 0~300.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

26 总磷 0~5.00mg/L Ⅰ、Ⅱ、Ⅲ、Ⅳ 0.01mg/L ±5%Fs

27 硝酸盐氮 0~20.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

28 fluoride ions 0~200.00mg/L electrochemical method 0.1mg/L ± 5%

29 detergent 0~1.00mg/L Ⅰ, Ⅱ 0.01mg/L ± 5% Fs

30 ozone 0~2.50mg/L ozone reagent 0.01mg/L ± 5% Fs

31 compound chlorine total chlorine residual chlorine

32 锰 1.00~1.00mg/L Ⅰ、Ⅱ、Ⅲ 0.01mg/L ±5%Fs

33 User defined backup

34 User defined Backup

35 User defined Backup

36 TDS (pen type) does not require reagents

37 PH (pen type) no reagent required

38 thermometer (pen type) does not require reagents

39 Water Hardness I, II, III(Titration method)

40 CODmn Ⅰ(Titration method)

41 Smell and Taste

42 Chlorides I and II