Wuhan high and low temperature alternating humidity test box in stock

Wuhan high and low temperature alternating humidity test box in stock——Main technical indicators
1.ADX-THS-100A
2. Inner box size (cm) W × H × D 500 × 400 × 500 (100 type)
3. Outer box size (cm) 1050 * 1000 * 1700 (100 type)
4. Temperature range: 0-150 ℃;
7. Humidity range: 60% to 98% RH: (see temperature and humidity range diagram for details)
5. Temperature fluctuation: ≤± 0.3 ℃
6. Temperature deviation: ≤± 1.5 ℃
7. Humidity deviation: ± 2.5% RH (when humidity>75% RH); ± 3% RH (when humidity is ≤ 75% RH);
8. Heating time: within 45 minutes at 0 ∽+150 ℃;
9. This device cannot be used to test or store items containing flammable, explosive, or volatile or corrosive gases Note: The above indicators were measured at room temperature of+25 ℃ without a sample
Wuhan high and low temperature alternating humidity test box in stock——Control system (users can choose according to their own requirements):
1. You can choose a fully imported 5.7-inch touch sensitive temperature and humidity TEMI880 controller
2. You can choose a 1.5-inch temperature and humidity TEMI580 controller with a fully imported small touch screen
3. You can choose to use the blue screen TEMI300 temperature and humidity controller
4. You can choose a button type KR-K temperature and humidity controller
For example, TEMI880 controller:
1. Adopting TEMI880 LCD touch screen and temperature and humidity controller imported from South Korea.
2. It can display set parameters, time, working status of heater/humidifier, etc., and also has PID parameter self-tuning function.
3. The control system uses intelligent control software system, which has the ability to automatically combine the working conditions of heating, humidification and other subsystems, thereby ensuring high-precision control over the entire temperature and humidity range, achieving the goal of energy conservation and consumption reduction.
4. A complete detection device can automatically display detailed faults and alarms. When an abnormality occurs in the test chamber, the controller will automatically display the fault status.
5. Screen display: can display the set temperature and humidity; Actual measured temperature and humidity; Heating, humidification and other working states, as well as various alarm indicators.
6. Setting accuracy: Temperature: 0.1 ℃; Humidity: 0.1% R.H;
7. Operation mode: Constant operation;
8. Electrical components: Schneider AC contactors, thermal overload relays, OMRON small relays, Delixi circuit breakers, etc.
——Humidification and dehumidification system:
1. Adopting an electronic parallel position micro humidification system, equipped with three imported magnetic spring switches, can reduce erroneous actions caused by electronic devices
2. The humidifier cylinder is made of stainless steel and comes with a water level observation window
3. Adopt evaporator coil dew point temperature (ADP) laminar contact dehumidification and dehumidifier dehumidification methods
4. Equipped with a dual protection device for overheating and overflow, it can be used with peace of mind
5. The humidification/dehumidification system is independent
6. When supplying humidification cylinder water, pure water or RO reverse osmosis water should be used as much as possible
7. Yongbang dehumidifier dehumidification (detailed parameters are as follows)

——Cold system control:
1. Cooling method: air-cooled
2. Compressor: Fully enclosed French Taikang 1.5HP × 1 × 1 set
3. Condensation method: forced air cooling
4. Refrigerant: R404A, (environmentally friendly)
5. All system pipelines undergo ventilation and pressure testing for 48 hours to detect leaks
6. The heating and cooling systems are independent
7. Internal spiral refrigerant copper tube
8. Slope evaporator
9. The dry filter, refrigerant flow window, repair valve, oil separator, solenoid valve, and storage tank are all imported original parts