UV aging test chamber

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Due to the gradual decay of UV light energy output over time, in order to reduce the impact of light energy attenuation on the test, the UV aging test chamber replaces an old lamp tube with a new one every 1/4 of the fluorescent lamp life (lamp life: 600H) among the eight lamps. The UV light source is always composed of new and old lamps, thus obtaining a constant output of light energy.

Product Details

UV aging test chamberBlackboard temperature control:
1. Using black aluminum plate to connect temperature sensor
2. Using a blackboard temperature meter to control heating, the temperature is more stable

UV aging test chamberCircuit control system:
1. RKC temperature controller control, control accuracy ± 0.1 ℃
2. Thin film KEY BOARD
3. Equipped with power-off memory function, it can continue the remaining test process when restored to power
4. The temperature control adopts P.I.D+S.S.R, and the system coordinates control with the same channel, which can improve the stability and service life of control components and interfaces
5. Touch sensitive settings, digital and direct display
6. It has the function of automatic calculation of P. I. D, which can reduce the inconvenience caused by manual setting
7. Lighting, condensation, and spraying can be independently controlled or alternately controlled in a cyclic manner
8. The independent control time for lighting and condensation, as well as the alternating cycle control time, can be set arbitrarily within one thousand hours
9. In operation or setting, if an error occurs, a warning signal will be provided
10. Schneider components from France.
11. Imported Philips rectifier (ensuring that the UV light can be turned on every time the device is turned on)

Technical Specifications:
1. Studio size D × W × H 450 × 1170 × 500. Supporting sample quantity: 150 × 75, approximately 40 pieces
2. Performance indicators: Temperature range RT+10 ℃~70 ℃
3. Humidity range: ≥ 95% R.H
4. Distance between lamp tubes: 35mm
5. Distance between sample and lamp tube: 50mm
6. UV wavelength: 290nm~400nm UV-A, UV-B, UV-C (specified at the time of ordering)
7. Lamp power: 40W
8. Temperature controller: imported LED digital display P, I, D+S, S, R. microcomputer integrated controller
9. Time Controller: Imported Programmable Time Computer Integrated Controller (Golden Bell Moler)
10. Light heating system: fully independent system, nickel chromium alloy electric heating heater
11. Condensation humidification system: All stainless steel shallow surface evaporative humidifier
12. Blackboard temperature: bimetallic blackboard thermometer
13. Water supply system: humidification water supply adopts automatic control
14. Exposure methods: Wet vapor condensation exposure, light radiation exposure