Used single-layer mesh belt dryer dryer

Used single-layer mesh belt dryer dryerUsed single-layer mesh belt dryer dryer

The mesh belt dryer mainly transports the compressed finished balls directly to the flat conveyor through the conveyor, and evenly distributes the finished balls on the dryer through the scraper at the upper end of the flat conveyor, improving the breathability of the balls and achieving the drying effect.

The drying time is generally 20-30 minutes. The high-temperature drying furnace is composed of a chain conveyor made of heat-resistant steel and a high-temperature tunnel kiln. The conveyor belt adopts high-temperature resistant metal mesh belt, and the balls are dried on the mesh belt for 25-30 minutes before being output by the cooling mesh belt.

Mesh belt dryer is a commonly used continuous drying equipment, which can be widely used in industries such as building materials, electronics, etc. It is particularly suitable for drying sheet, strip, and granular materials with good breathability. For cake like paste materials, they can also be dried after being formed by granulator or extrusion mechanism.

1. Mesh belt dryer, material retention time, and feeding speed to achieve better drying effect.

2. Flexible equipment configuration: The mesh belt dryer can use a mesh belt flushing system and a material cooling system.

3. Mesh belt dryer (mesh belt dryer) mostly utilizes air circulation, which highly saves energy.

4. The air distribution device of the dryer * ensures a more uniform distribution of hot air and guarantees the quality of the product.

5. The heat source can be matched with steam, thermal oil, point or gas hot blast stove.

The main principle of a mesh belt dryer is to evenly spread the materials on a mesh belt, which is then dragged back and forth inside the dryer by a transmission device. Hot air flows through the materials, and water vapor is discharged from the dehumidification holes to achieve the purpose of drying. Mesh belt adopts12-60The purpose of the steel wire mesh belt is that the length of the box is composed of standard sections. In order to save space, the drying machine can be made into multiple layers, commonly including two rooms and three layers, two rooms and five layers, and length6-40m, effective width0.6-3.0m.Mesh belt, transmission device, inlet duct, outlet duct, fan(Place the hot air source separately)Waiting for composition.