Upper latitude 901 resin

*Wholesale glass flake adhesive paste with warp 901 resin
*Wholesale glass flake adhesive paste with warp 901 resin
*Wholesale glass flake adhesive

Ethylene based glass flake adhesive manufacturer, epoxy glass flake coating, glass flake lining material is a composite material in the form of adhesive paste made by mixing dispersed discontinuous glass flakes, viscous resin, and related functional fillers through equipment. It is mainly used in absorption towers and clean flue gas ducts of flue gas systems; The original flue gas duct, waste incineration flue, and various chemical media with high temperature and oxidizing properties in the flue gas system; Electrolytic cells, various chemical equipment, water treatment systems, petroleum storage tanks, marine engineering, buildings, flooring; Waiting for the medium. Such as storage tanks, water treatment systems, urea granulation towers, concrete industrial buildings, etc.

Anti corrosion principle and structure: Anti corrosion principle - maze effect of glass flakes. This shielding effect reduces the generation of bubbles under harsh usage conditions. Due to the layered configuration of glass flakes, coupled with the barrier effect of flakes and additives, it can improve adhesion and prevent fracture and peeling by reducing the expansion coefficient and hardening shrinkage rate in the surface direction. These important effects are all achieved through close shear fusion with resin properties.

Performance characteristics:
1. Has * anti permeability barrier and low permeability of corrosive gases;
2. Good resistance to water, alkali, some solvents, and other special chemical media;
3. Small hardening shrinkage, strong adhesion to various substrates, easy to repair locally;
4. High toughness, good mechanical properties, adaptable to sudden temperature changes;
5. 100% cross-linked curing, high surface hardness, and good wear and corrosion resistance;
6. Suggested operating temperature: 140 ℃ for wet state and 170-190 ℃ for dry state.

Applicable locations:
1. Lining of steel structures and concrete buildings (structures) in harsh environmental conditions such as power plants, smelters, and fertilizer plants with flue gas;
2. Internal and external surface protection of liquid-phase media equipment, pipelines, and storage tanks with moderate corrosion strength or below;
3. Composite use with fiberglass reinforced plastic (FRP) yields better results, such as for high-speed metal impellers;
4. Manufacturing, environment, and equipment of power plants, smelters, fertilizer plants, etc;
5. The harsh environment of alternating corrosion of gas, liquid, and solid in the splash zone of marine facilities.