UK OXOID anaerobic culture tank (anaerobic gas production tank)

the United KingdomOXOID 2.5Anaerobic tank (AG0025A)

a2.5The anaerobic cultivation tank with a capacity of one liter includes the following components: tank body, tank cover, four clips, and self release function. The can lid is equipped with a handle and a vacuum release valve. The tank is equipped with a stainless steel petri dish holder. This anaerobic tank can hold a maximum of12a9cmCulture dish.Not applicable to traditional gas generation systems.Compact design, sturdy and durable.Clamp design, containing stainless steel flat carrier, can hold up to12One culture dish, consuming one anaerobic gas bag per cultivation

Internal height:18.5cmInternal bottom diameter:11cmInternal top diameter:13.5cm

External height:20cmOuter bottom diameter:12.7cmOuter top diameter:17.3cm

Requires:2.5LAnaerobic gas bag (item number)AN0025A）When anaerobic conditions are reached during initial use, anaerobic indicators can be addedBR0055B.

Basic operating procedures:

1Put the inoculated petri dishes into the anaerobic tank,Take a piece of anaerobic indicator, cut it along the dotted line, and extract the contents10mmPlace it in the designated location.

2Along theAN0025ATear open the indicator line on it and remove the production bag (paper bag) from it (be careful not to tear the paper bag).

3Immediately place the gas producing paper bag in the anaerobic tank. (Note: Gas producing paper bags come into contact with air),It will generate heat. ）

4Immediately seal the anaerobic tank.

(Above steps)2-4must be1Complete within minutes, otherwise it will affect the anaerobic effect

5After the cultivation is completed, remove the plate and observe the results. The used airbag should be handled properly.