Two ton titanium forced circulation evaporator - newly sold in good condition

Two ton titanium forced circulation evaporator - newly sold in good conditionEvaporators have the following characteristics in industry applications；1. Energy saving benefits, calculated according to the SJN-1000 model, can save about 54000 tons of steam, about 14 tons of water, and about 130000 kWh of electricity annually, equivalent to RMB 200000-250000 (compared with single effect). 2. The three effect concentrator adopts a natural circulation evaporation method with negative pressure external heating, which has a fast evaporation speed and a high concentration ratio, reaching 1.25-1.4 (generally for traditional Chinese medicine extracts). 3. The three effect concentrator adopts dual effect simultaneous evaporation, and the secondary steam is used. Compared with the single effect concentrator, the total energy consumption is reduced by 67%. The energy-saving cost for one year can recover the entire investment of this concentrator. 4. Multi functional operation features: (1) Recyclable alcohol concentration of 80%; (2) Single effect, double effect, and triple effect can be repeatedly combined and used to apply ointment; (3) It can be fed intermittently or continuously. 5. The contact parts between the three effect concentrator and the material are made of stainless steel, which meets the requirements of GMP standards. Beautiful appearance. The heater and evaporator are both equipped with insulation layers, and the outer shell of the insulation layer is made of stainless steel sheet, with a mirror or matte finish on the surface.The evaporator is an important component among the four major refrigeration parts. Low temperature condensed liquid exchanges heat with the outside air through the evaporator, vaporizes and absorbs heat to achieve the cooling effect. The evaporator is mainly composed of a heating chamber and an evaporation chamber. The heating chamber provides the heat required for evaporation to the liquid, promoting boiling and vaporization of the liquid; The evaporation chamber separates the gas and liquid phases The vapor generated in the heating chamber contains a large amount of liquid foam, which can be separated from the vapor through self aggregation or the action of a demister in a larger evaporation chamber. Usually, the demister is located at the top of the evaporation chamber.The structure of the evaporator is:;A metal circular basin with an inner diameter of 200mm and a height of approximately 100mm for the evaporator. The evaporator is a metal circular structure with smooth inner walls, and there should be no burrs or scratches on the edges of the evaporator. All parts in contact with water should be smooth, and the welds at their mating or connecting parts should be tight, firm, and free of water leakage. The assembly of all components and parts of the evaporator should be correct, without any looseness, deformation, or other defects that may affect its use. The protective layer applied to each component of the evaporator should be firm, uniform, and smooth, without defects such as delamination or rust. The evaporator and installation frame should be easy to install and able to prevent the evaporator from detaching due to wind force during normal use. Attachment: One graduated measuring cup, one water reservoir, one installation frame, and one metal mesh cover (for drinking water, users can choose).The evaporator is a low-temperature condensed liquid that is heated and evaporated by the outside air, and then the heat required for liquid evaporation is provided by the heating chamber to accelerate the boiling and vaporization of the liquid. The steam generated in the heating chamber contains a large number of small liquid droplets, which can be separated from the steam by their own cohesion or the action of a demister. Usually, the demister is installed at the top of the evaporator chamber. The evaporator mainly consists of two parts: the heating chamber and the separation chamber. The main structural dimensions of the evaporator include the diameter and height of the heating chamber and the separation chamber, the specifications and length of the heating tubes, as well as the arrangement on the flower plate and the size of the connecting tubes. The determination of these dimensions depends on the process calculation results, mainly the heat transfer area. The BL type multi effect counter current and co current evaporator series equipment is used for the evaporation and concentration of corn syrup, fermented sugar juice industry, fruit juice, beverage industry, dairy industry, pharmaceutical industry, and chemical wastewater. It has energy-saving, short heating time, and high work efficiency, and is suitable for the evaporation and concentration of high viscosity raw materials.The structure of a falling film evaporator is basically the same as that of a rising film evaporator, with the difference being that the raw material liquid is preheated and uniformly enters the tube from the top of the evaporator through a liquid distribution device. Under the action of gravity, it flows down along the inner wall of the tube in a film shape and is evaporated and concentrated. The gas-liquid mixture flows down and enters the separation chamber from the bottom of the heating tube. The falling film evaporator can be divided into three types based on material properties: counter current, co current, and cross current. The equipment operates mostly under negative pressure and has good safety performanceTriple effect falling film evaporator；(1) Scope of application: Suitable for pharmaceuticals, glucose, starch, chemical industry, xylose, citric acid, ammonium sulfate, biochemical engineering, environmental engineering, waste liquid recovery and treatment, etc. (2) Equipment features: A. It consists of a first, second, and third effect separator, first, second, and third effect evaporator, preheater, condenser, and hot press pump. B、 Low evaporation consumption, 1kg of steam can evaporate 3.2 water. C、 The evaporation temperature is low, and some of the secondary steam is re sucked into the primary heater through a jet type hot press pump, making full use of the heat and resulting in a relatively low evaporation temperature. D、 High concentration ratio, falling film evaporation, making the viscous liquid easy to flow and evaporate, less prone to scaling, short concentration time, concentration ratio can reach 1:5.E、 This device can achieve fully automated production, intelligent system management, and comply with GMP standards.(3) Evaporation capacity: 1000-50000kg/h.

Two ton titanium forced circulation evaporator - newly sold in good conditionShandong Jiyoupin Machinery Equipment Co., Ltd. supplies and sells.