Textile vertical combustion testing machine

1Textile vertical combustion testing machineProduct Introduction

This is a touch screen controlled textile vertical combustion instrument. The textile vertical combustion instrument HD-R808 is an upgraded product based on the original equipment technology, using touch screen control and highly automated testing. In addition to the automation functions that rely on various buttons and tools, the touch screen control model can store past test data and retrieve it during testing. This device is suitable for various fabrics and their products such as safety nets, FH clothing, and seat belts, and is ultimately applicable to the test method for the combustion performance of vertical textile bottom edges when ignited as specified in the GB5455-2014 standard.

Design standard: GB5455-2014 "Determination of vertical release damage length, smoldering and reigning time of textile combustion performance"

Applicable standard: GB6529

GB5725-2009 Safety Net

GB 8965.1-2009fh Clothing - Flame retardant protection - Part 1: Flame retardant clothing

GB/T 6096-2009 Test Methods for Safety Belts

GBT13489-2008 Rubber coated fabrics - Determination of combustion performance - Vertical small flame test method

IITextile vertical combustion testing machineMain technical parameters

Touch screen display/control

The equipment is divided into two parts: the control part and the combustion box. The size inside the combustion box is 330 * 330 * 765mm

The front of the combustion chamber is a tempered glass observation door

16 exhaust holes with an inner diameter of 12.5mm are evenly distributed on the top of the box; 6 exhaust holes with an inner diameter of 12.5mm are distributed on both sides of the combustion box

Installing a top plate on the top of the box

The top of the box is equipped with a bracket to support the style clip, and the bottom of the style clip is located 17mm above the high point of the igniter pipe mouth

The inner diameter of the igniter nozzle is 11mm, and the pipe head is at a 25 ° angle to the vertical line. Ignition time: accurate to 0.05s

Gas source: Industrial grade propane, butane, or propane/butane mixed gas, with methane gas with a purity of not less than 97% selected after sample pretreatment according to 7.3

Sample size: 300 * 89mm, five pieces each in the horizontal and vertical directions

Environmental temperature: -10 ℃ to 30 ℃

Supply voltage and power: 220V ± 10% 50HZ, power less than 100W

The flame application time of this lamp is 0-99M99S, which can be set arbitrarily with an accuracy of ± 0.1s (standard uses 12s)

Afterglow time: 0-99M99S long

Bensheng Lamp Blue Flame Height: 15mm-175mm can be adjusted freely, equipped with a flame height ruler (40mm high)

The Bunsei lamp automatically ignites, automatically counts, and the ignition time can be set arbitrarily (can be preset)

Touchscreen related parameters:

a. Size: 7-inch effective display size, length 15.5cm, width 8.6cm;

b. Resolution: 800 * 480

c. Communication interface RS232, 3.3V CMOS or TTL, serial port mode

d.储存容量: 1G

e. Using pure hardware FPGA driver for display, with "zero" startup time, it can run immediately upon power on

f. Adopting M3+FPGA architecture, M3 is responsible for instruction parsing, FPGA focuses on TFT display, and both speed and reliability are ahead of similar solutions

g. The main controller adopts low-energy processors and automatically enters energy-saving mode