Textile Factory Humidification - Steam Water Mixing (Dry Mist) Humidification System

Application places of humidification equipment (steam water mixed humidification system) in textile factories:

Pre spinning workshop, post spinning workshop, twisting workshop, coarse sand, fine sand, winding, carding and other processes

Soda water mixture (dry mist)Introduction to Wet System:

Soda water mixed humidifier, also known as dry mist humidifier, has an average particle size of up to 7.5um for atomization. Its main components are a humidification tank, a humidification nozzle, and an installation kit. It is generally used for humidification in electronic factories, textile factories, anti-static factories, printing factories, painting workshops, and paper mills. This humidifier is currently the most high-performance gas-liquid mixing humidifier. A dry fog humidifier can humidify the plant within 200-300 square meters, the humidity can be controlled between 30% -90%, and the spray direction can be adjusted at will.

Advantages of Soda Mixing (Dry Mist) Humidification System:

1. Large amount of spray, no blockage, no leakage and less maintenance after long-term use.

2. Steam water mixed atomization, high humidification efficiency.

3. The atomization effect is good, with a particle diameter of 5-10 microns, making it easier to absorb.

4. The spraying distance is far, reaching 4-6 meters, with a large coverage area.

5. Easy to install: No rust, strong corrosion resistance.

Case Study of Moisture Mixing (Dry Mist) Humidification System in Textile Factory