Surface resistance tester

TREK 152-1 Surface Resistance Tester

The long-distance surface resistance meter (152 type) is a lightweight,
Portable device used for precise measurement of surface resistance
In extensive conductive dissipation,
Insulation material. Its characteristic is outstanding measurement
Accuracy, wide measurement range, and multiple probe configurations
Options.

152 type surface resistance meter
Design of Traverse 152 Surface Resistance Meter
Measure the conductivity of high surface resistance varieties,
Dissipative and insulating materials. 152 used a model
Measurement technology, compliant with ANSI/anti-static standards
To measure surface resistance and association standards
Surface resistivity includes ANSI/ESD-STM2.1 clothing,
STM4.1 work surface, STM7.1 floor, STM11.11
11.13 Plane material, measure two points with STM. one
Various measurement probe electrode configurations
Used for manufacturing surface resistance or surface resistivity
Measurement.

The outstanding measurement accuracy and characteristics of the model in 152 years
Wide measurement range of 10 E3, 10 E13 ohms for use
Point to point detector or two-point resistance probe
Small surface measurement, 10 E4 10 E14 lamp head ohms/square
Use concentric ring detectors. Resistance measurement value
Is it obviously displayed on a high contrast LCD display for use
Scientific notation.
Electrode test voltage measurement probe (s)
The switch can be operated with 10 V or 100 V to meet the requirements
Personal requirements for anti-static association standards
And testing conditions. Selected test voltage
On the LCD display.
*Traverse 152 type p-cr concentric ring measurement
The investigation includes the elimination of a typical preamplifier
Related to low noise and scattering, and long settling time
Other types of survey designs, therefore providing ease of operation
Even at very high resistance values. The model will be tested in 152 years
Active concentric ring connection probe, automatic
Adjust the measurement range and indicate the ohm/square value
On the LCD display.
Model 152 is lightweight and portable, and can be operated on
From internal battery or connected to an AC power source
Use battery substitutes.
• Measurement capability
10 E3 10 E13 ohms.
(Extended to 10 e14 lamp head ohms using concentric ring detector).
Surface resistivity and surface resistance probe measurement range
• Concentric ring detector
10 E4 10 E14 lamp head ohms/square.
• Point to point detection
10 E3 10 E13 ohms.
Two point resistance probe
10 E3 10 E13 ohms.
• Measurement accuracy (read)
25 ° C ± 10 ° C at a relative humidity of 20% -70%:
Concentric ring detector (152 p-cr)
10 E4 10 E13 ohms/square,
± 5% LCD reading,
10 E14 lamp head ohms/square,
± 8% LCD reading.
Point to point detector (152 ap-5p)
10 E3 is worth a range of 10 ohms,
± 5% LCD reading,
Range of 10 E13 ohms,
± 8% LCD reading.
Two point resistance probe (152 p-2p)
Range of 10 E3 and 10 E11 ohms,
± 5% LCD reading,
10 Value 10 E13 Ohm Range,
± 10% LCD reading.
• Meter probe electrode testing voltage
Users can choose between 10 V or 100 V, ± 2%.
Test current limit
Limited to less than 13 horses in the 10 V range and insufficient
1.7 Horses
Within the range of 100 V.
• Test probe (purchased separately)
152 ap-5p 2.27 kg) long-distance model. (5 pounds.) Test probe (set)
Two probes can be used to perform resistance measurements
Each ANSI/ESD-STM4.1 standard (point-to-point or surface resistance)
Measurement).
B) Long journey 152 type p-cr 2.27 kg. (5 pounds.) Concentric ring test probe
include
A preamplifier for surface resistance/surface resistivity
Measurement/ANSI/ESD-STM11-11 standards.
*Traverse 152 type p-cr concentric ring measuring probe
Contains a preamplifier that eliminates typical noise and wandering
The long settling time of the microphone is related to other types of investigations
Provide an easy-to-use design, so even at very high levels
The value of resistance.
C) Long distance 152 type p-2p probe for resistivity measurement. The surface area is too small, and conventional measuring probes are used

Measurement range: 10 E3-10 e13 ohms
Measurement accuracy (reading value):
152 year ap-5p: 10 E3-10 value range in ohms, ± 5%
Range of 10 E13 ohms, ± 8%

152 year p-cr-1 and 152 p-2p: 10 E3-10 E11 ohm range, ± 5%
Value range of 10-10 E13 ohms, ± 10%

Surface resistance meter, equipped with concentric ring probe, point-to-point probe, two-point resistance probe, concentric ring probe preamplifier can effectively eliminate interference and conduct reliability testing with high resistance values. It has high accuracy, stability, repeatability, and a wide measurement range: 10 ^ 4th power ohms~10 ^ 14th power ohms/square or 10 ^ 3rd power ohms~10 ^ 13th power ohms. The rubber electrode provides * surface contact, lightweight and portable
Surface resistance measuring instrument, used to evaluate the conductivity of anti-static flooring, workbenches, clothing, etc