Supply 600L gantry planetary mixer

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

coating

Product Details

Product Name: 600L Longmen Planetary Blender
Detailed parameters: 600L gantry planetary mixer Quantity: 1 set
*Longmen type, with pressure feeding machine, equipped with two pull cylinders
Mixing section:Dual planetary stirring+scraping wall scraping bottom deviceOne set of scraping blades, made of SUS304 and Teflon materials,
Consistent with the speed of planetary revolution
Mixing motor power: 45kw Power supply: 380v/50HZ with frequency converter, matched reducer speed ratio I=40.26, usage factor
Mixing form:Spiral Fried Dough Twists+single scraped wall, material SUS304, thickness can be customized
Planetary rotation speed: 0-65rpm, adjustable
Planetary orbital speed: 0-60rpm, adjustable
Gap: Paddle to Paddle: ≤ 6mm
Paddle and bottom tolerance: 1-4mm
Mixing blade and bucket wall tolerance: 4+1.5mm
Distributed part: Motor power: 45kw Power supply: 380v/50HZ with frequency converter, matched reducer speed ratio I=40.26, usage factor
Speed: Speed: 0-1500rpm and above Adjustable line speed 19.6m/s
Dispersion form: upper and lower serrated high-speed dispersion disc, made of SUS304 material, size specification: diameter 250mm, two shafts, each shaft has two dispersion discs
Distributed shaft adopts: synchronous belt transmission, using high torque belt (widened and thickened)
Provide gear drawings for the mixing and dispersing mechanism (gear material,The mixing gear needs to have an additional oil filling port）-After completing the design, provide drawings, select gear materials and models, and confirm with the customer
Shaft: The shaft propeller is made of high-strength material, and the thickness and dimensions are confirmed with the customer before production
Container lid: The upper barrel is made of SUS304 material, with one powder feeding port and one liquid feeding port that can be quickly opened and closed, and reserved space for automatic feeding transformation; One spotlight with two small windows (one spotlight port and one observation hole), one vacuum pressure gauge, one vent port, and other necessary connections
Mixing and Pulling Cylinder: Quantity 2 Material 304 Pulling Cylinder Effective Capacity: 600 L
Jacket: A jacket with a reinforced guide plate (spiral) that can be used to pass hot water
Discharge: One bottom side discharge port for easy discharge, equipped with DN65, one manual quick connect ball valve, and one pair of lifting hands
The cylinder body needs temperature measurement
Vacuum system: Vacuum degree ≤ -0.09MPa
Equipped with vacuum buffer tank, vacuum pump, switch
The vacuum pressure drops from 0.09 to a maximum of 0.06 Mpa within 1 hour of holding pressure, and no oil seeps into the barrel while stirring or holding pressure
The vacuum pump is installed at the bottom of the machine, and the static seal adopts an O-ring made of fluororubber
Temperature system: equipped with a stable testing system, no need for heating rods, heating and cooling rely on external connections
Temperature testing error range ± 1.5℃within
Positioning system: equipped with a positioning adjustment device and a barrel locking device, it can accurately locate the mixing barrel and the upper barrel to prevent travel; The positioning stop of the lower flange of the upper barrel body is precisely matched with the mixing barrel to ensure that the position of the mixing barrel is reasonable and the positioning is accurate
Material pressing system:Integrated with the mixing section, with a pressing stroke of 1500m or more
Stacked hydraulic control one-way valve to prevent oil valve from leaking oil
Double oil cylinder
Power should be greater than 8kw, working pressure should be ≥ 30Mpa
The discharge port needs to be equipped with a sleeve type filtering device (with a mesh plate, aperture 3mm, thickness 5mm)(The filter is a consumable and needs to be prepared by oneself)
The discharge pipe needs to be heated and insulated (temperature: adjustable from room temperature to 45 degrees Celsius). The discharge pipe is made of polyurethane material with heating function (to prevent slow glue release in winter)
Add a one-way valve for reverse blowing on the end cover, and add an exhaust port for the pressure cover. There are three ports on the end cover, namely the reverse blowing port, exhaust port, and adhesive outlet
Component brand: Inverter: Delta Heavy Duty
Thermostat: Omron
Switching power supply: Mingwei, Omron
Bearing type: SKF、NSK
PLC: Mitsubishi human-machine touch screen: Weilun Tong - Our company commonly uses Siemens PLC, which can be changed to use Mitsubishi
Other electrical components: Schneider, Omron and other equivalent brands
Other pneumatic components: Schneider, Omron and other equivalent brands
*Attention: The customer has raised an issue with the cylinder diameter of the material press, and it is necessary to ensure that the new material press can achieve a pressure of 30Mpa

Blender size: 2300 * 1505 * 3700mm

Dimensions of the material press: 1860 * 1305 * 3565mm