Sunroom sunshade insulation aluminum foil reflective film

Sunroom sunshade insulation aluminum foil reflective film

Product structure:

Aluminum+bubble+aluminum, aluminum+bubble+bubble+aluminum, aluminum+bubble+EPE+bubble+aluminum, aluminum+woven fabric+aluminum, aluminum+non-woven fabric+aluminum and other combination structures.

Features:

1. This product is odorless, non-toxic, and environmentally friendly;
2. Lightweight, soft, dust-free, flame retardant, easy to install;
3. It has functions such as heat reflection, heat insulation, sound absorption, anti radiation, shock absorption, noise reduction, etc;
4. Moisture resistance, sun protection, waterproofing, anti-seepage, good sealing, aging resistance, insulation and energy saving;
5. Summer can prevent moisture, sun, and heat, saving air conditioning; Winter can keep warm and save heating; Energy saving *.
Usage: 1. Roofs, walls, floors;
2. The outer shell of air conditioning, water heater, and high-temperature furnace;
3. Outer protective layer for water pipes and ventilation pipes.
Method 1: A simple method on the floor and roof is to use butyl rubber tape (or strong double-sided adhesive tape), firmly attach the overlapping interface between the insulation film and the insulation film, and then use waterproof pure aluminum adhesive tape to stick the overlapping area between the films firmly; Lay it on the floor, with a distance of 1 meter around and in the middle, and press it down with bricks (or add some angle iron) to prevent it from being lifted up by the wind. When the weather cools down in autumn, put away the insulation film, store it, and fix it in the same way tomorrow summer.

Method 2: On the floor and roof: Use 30mm wide iron sheets or aluminum alloy pressure strips to press down on the insulation film at the perimeter and middle joint positions. Just add explosive screws or small steel nails on the pressure strip to prevent it from being lifted up by the wind.
Method 3: Under the roof slab (indoor): Make a simple wooden frame under the slab, fix the insulation film on the wooden strip with iron nails and small washers.

Method 4: On the glass roof: Use identification tape to stick the insulation film around the glass surface; Overlapping positions, also use identification tape to stick the insulation film to the insulation film to prevent it from being lifted up by the wind.
Method 5: Inside the glass roof: Use a pair of handle type suction cups (2) to suck onto the glass surface of the indoor roof (one on each side, with a distance of 1.2 meters); Fix a 1.22 meter long plastic PVC small round tube onto the suction cup hook.
Fix a pair of suction cups and a PVC small circular tube at a distance of 1 meter. Then fix the insulation film on the PVC small round pipe and tighten it with iron clips on both sides.
Method 6: On the iron roof: Once the iron shed is ready, use a sun panel, aluminum alloy pressure strip, and self tapping screws to press the insulation film onto the iron roof to prevent wind damage;

Method 7: Use iron wire (steel wire rope) to pull a mesh frame under the iron tiles (or under the top of a glass house) and fix it, or install a ceiling.
Method 8: For newly built iron sheds, lay insulation film on the steel frame first, and fix the four corners with zip ties and self tapping screws; Overlap 10 centimeters between two pieces, first pull a 50mm wide iron sheet below the overlapping position to fix it, and then stick it with aluminum foil tape at the overlapping joint to prevent air leakage; Just cover it with color steel tiles.
Our factory's product material specifications can be customized according to customer requirements, and the prices of raw materials may fluctuate, so the prices of finished products may vary. The displayed products are just a list of some samples. Before placing an order, please be sure to consult our Wangwang customer service to modify the price, or call us directly!
About shipping
We will ship your order once we confirm the cooperation method and reach a cooperation agreement.
We have dedicated personnel to strictly inspect the quality of the goods during shipment and packaging. Please feel free to purchase with confidence.
On Cooperation
We adhere to the service tenet of striving for excellence in production, honesty and trustworthiness in distribution, and enthusiastic and thoughtful service, as well as the entrepreneurial spirit of assisting partners in achieving their own careers, to provide customers with quality and serviceDouble sided double-layer aluminum foil bubble film insulation material Bubble insulation material is a new type of environmentally friendly insulation material, which is soft, lightweight, and easy to install. This material is a composite aluminum film or aluminum foil made by blow molding polyethylene into a bubble film, which has the characteristics of heat insulation, thermal insulation, waterproofing, moisture resistance, etc. This product is environmentally friendly and non-toxic. Its non bubble film only solves the discomfort and environmental hazards caused by previous glass fiber and foam materials such as rock wool, glass felt, etc. It can also block the thermal infrared that cannot be blocked by penetrating iron sheets, concrete, wood, and ordinary insulation materials. This is a new type of environmentally friendly insulation material that is soft, lightweight, and easy to install; Its structure is made of aluminum foil and polyethylene, processed by special machinery. This product is non-toxic and odorless. Its appearance not only solves the discomfort and environmental hazards caused by traditional glass fiber and foam materials to the human body, but also prevents ultraviolet rays that can penetrate through iron sheets, concrete, wood, and ordinary insulation materials and enter the room. This type of insulation material has good insulation, heat reflection, insulation, and anti radiation functions on the one hand; On the other hand, its material properties can play a good role in moisture resistance, insulation, and energy conservation in building applications such as roofs, walls, and floors.

Function:
Can be installed on roofs, walls, or floors, providing 80% protection for buildings from the outside world

The above thermal energy barrier function protects walls and resists sudden temperature increases and decreases.

Features:
1. This product is odorless, non-toxic, and environmentally friendly;
2. Lightweight, soft, dust-free, flame retardant, easy to install;
3. It has functions of heat reflection, insulation, sound insulation, anti radiation, shock resistance, and shielding;
4. Moisture proof, sun proof, waterproof, good sealing, and energy-saving insulation;
5. Summer: moisture-proof, sunscreen, heat insulation, saving air conditioning;
6. Winter has a thermal insulation effect, which can save heating and have significant energy-saving effects.

Purpose:
1. Roofs, walls, and floors;
2. Air conditioner and water heater jacket;
3. Outer protective layer for water pipes and ventilation pipes

Product Description:
This is a new type of environmentally friendly thermal insulation material that is soft, lightweight, and easy to install. It is made of aluminum plated film and polyethylene, processed by special machinery, and is odorless and non-toxic.The middle polyethylene bubble layer can be equipped with multiple layers of polyethylene bubbles, with neatly arranged bubbles inside the layer. The diameter of the bubbles can be selected from 525mm, and the height can be selected from 2-7mm. Various colors or fire-resistant substances can be added to the bubble material. The outer protective layer can be coated with colored or composite polyethylene of various colors.

There are three main ways of heat conduction: radiation, conduction, and convection.

Not only does it solve the discomfort and environmental hazards caused by glass fiber and foam materials in the past, but it can also block ultraviolet rays that penetrate through iron sheets, concrete, wood, and ordinary insulation materials and enter the room. By combining the reflective and thermal properties of aluminum plated film material with polyethylene material, it not only has good insulation, heat reflection, thermal insulation, and anti radiation functions, but also plays a good role in moisture-proof, thermal insulation, and energy saving in building applications (roofs, walls, floors) through the characteristics of this material.

Function:
Can be installed on roofs, walls, or floors, providing 80% protection for buildings from the outside world

The above thermal energy barrier function protects walls and resists sudden temperature increases and decreases.

Features:
1. This product is odorless, non-toxic, and environmentally friendly;
2. Lightweight, soft, dust-free, flame retardant, easy to install;
3. It has functions of heat reflection, insulation, sound insulation, anti radiation, shock resistance, and shielding;
4. Moisture proof, sun proof, waterproof, good sealing, and energy-saving insulation;
5. Summer: moisture-proof, sunscreen, heat insulation, saving air conditioning;
6. Winter has a thermal insulation effect, which can save heating and have significant energy-saving effects.

Purpose:
1. Roofs, walls, and floors;
2. Air conditioner and water heater jacket;
3. Outer protective layer for water pipes and ventilation pipes

Sunroom sunshade insulation aluminum foil reflective film