Spray humidification 50kg high-power industrial humidifier

Spray humidification 50kg high-power industrial humidifierOverview

The Sado series ultrasonic industrial humidifiers are designed for external wall suspension or rubber wheel walking. The equipment is made of stainless steel box with surface spray treatment, which has a beautiful and practical appearance and is easy to install.MeThe series of ultrasonic industrial humidifiers are equipped with standard water supply ports, water discharge switches, and overflow ports. The lines are evenly distributed with mist outlets, and the connections between the pipelines need to be sealed.MeThe series of ultrasonic industrial humidifiers adopts an integrated * and is equipped with a waterless protection device, producing mist particles with a diameter of only1-10MmThe particles are uniform and can remain suspended in the air for a long time.MeThe series of ultrasonic industrial humidifiers have no mechanical drive, no noise interference, and no pollution during atomization work. They have high atomization efficiency, low failure rate, and low energy consumption. They are efficient, reliable, and practical ultrasonic industrial humidification equipment.

Ultrasonic industrial humidifiers are divided into two control modes

（1） The manual switch controls the working mode, and users can work with one or multiple machines according to their own needs, or combine multiple machines for centralized control;

（2） Digital humidity controller for automatic control, (model followed by letters)“Z”The control range of the humidity controller can be determined by10%RH-95%RHArbitrary setting, control accuracy ±5%RHAt this point, the device can automatically operate within the set value without the need for personnel to be on duty.

Sashima model:Zd-45.0z

Humidification capacity:45KG/hour

electricity Source:380V/50Hz

merit Rate:2100W

electricity Flow:4A

Machine dimensions:750×700×460(Width, Depth, Height)mm）

Humidity control30%-90%RH

Control accuracy: ±5%

Applicable area600-700square meter

Mist outlet: Φ160×2

Water inlet method: continuous inflow of tap water

Control mode: manual+automatic

Water inlet, overflow outlet, and drainage outlet connecting pipes: equipped4Internal teeth

Sashima model:ZD-50.0Z

Humidification capacity:50KG/hour

electricity Source:380V/50Hz

merit Rate:2300W

electricity Flow:4.5A

Machine dimensions:750×700×460(Width, Depth, Height)mm）

Humidity control30%-90%RH

Control accuracy: ±5%

Applicable area700-800square meter

Mist outlet: Φ160×2

Water inlet method: continuous inflow of tap water

Control mode: manual+automatic

Water inlet, overflow outlet, and drainage outlet connecting pipes: equipped4Internal teeth

Spray humidification 50kg high-power industrial humidifierProduct Features:

1High humidification intensity, uniform humidification, high humidification efficiency, energy-saving, and power-saving, with only the power consumption of electrode humidifiers1／10Long service life, automatic humidity balance, and automatic water free protection function.

2Small size can be installed according to on-site conditions, with fast mist production, fine particles, no dripping, and the use of split and mixed airway technology, which will be larger than5Micro sized mist particles are filtered out without dripping, condensation, or blockage.

3Can be transported over long distances, choose110mmofPVCPipeline transportation of water mist, a single pipeline can deliver the mist20-30Mi Yuan does not require the use of a nozzle, so there is no problem of clogging the nozzle.

4High precision, the humidity control system uses a Northland humidity probe, with a control accuracy of ±5%RHWithin.

5Fully automatic control, the product is equipped with a humidity sensor and computer remote control, which can automatically humidify, add water, maintain constant humidity, protect against water, and provide overflow function.

6Energy saving and environmentally friendly, with low failure rate, this machine uses ordinary tap water.

7The energy consumption index of humidification is low, and there is no mechanical drive, no noise interference, no pollution, high atomization efficiency, low failure rate, low energy consumption, and reliability during atomization work Low operating costs, belonging to energy-saving and environmentally friendly humidification equipment.

8This product adopts multi-element atomization technology, and the diameter of the mist particles is less than5Micrometer; Can be quickly absorbed by air, with a humidification rate close to100%.

9The oscillation chamber and water mist components of this machine are made of stainless steel materials, waterproof and moisture-proof switch power supply, and waterproof and moisture-proof fan.