Small vertical disc milling machine

NegotiableUpdate on 02/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The small vertical disc grinder is suitable for grinding plastic materials such as wood plastic PVC, PS, PE, PET, LDPE, PEP, XPS, MPS, PPC, EVA, ABS, etc. The fineness is 20-80 mesh or above, and the thickness can be adjusted. The output is 130kg-300kg/h per hour, after installation; Dimensions: 3600mm (length) X 1600mm (width) X 3600mm (height); Machine weight; 1300kg; volume; 6 cubic meters;

Product Details

　　Small vertical disc milling machineWorking Principle:

This machine is equipped with a fineness analyzer and is a new type of powder making equipment dedicated to the special and difficult crushing of lightweight materials, fiber materials, brittle materials, tough materials, and other materials. This machine adopts self-priming feeding, replacing the disadvantages of traditional crushers that feed directly, accidentally insert metal blocks, and seriously damage the wood powder machine.

　　Characteristics and technological advantages:

1. Reasonable structure, crushing principle and technical parameters *, reliable operation, low consumption of vulnerable parts, and low operating costs; All components of the wood powder machine are equipped with wear-resistant protection, which reduces maintenance costs to a lower limit and generally increases the service life by more than 30%.

2. The crushing system design is reliable and greatly improves the service life of the equipment. The crushing chamber adopts a multi-stage crushing process and fine crushing principle device, which is characterized by high working impact force, high production efficiency, and strong fine crushing ability.

3. The whole machine consists of a host, a fan, an analyzer, a powder collector, a dust collector, and other parts. Each component has a compact structure and reasonable layout, with prominent features of easy operation, safe use, good sealing, and low noise.

　　Small vertical disc milling machinemaintain:

1. During use, a dedicated person should be assigned to supervise and the operator must have a certain level of technical knowledge to operate the equipment. Before installation, the equipment must provide necessary training to the operators to better understand the installation process and precautions.

2. After using the vertical grinder for a period of time, the worn parts should be inspected and updated, and the various parts of the equipment should be checked for integrity. If there are any problems, they should be replaced in a timely manner.

3. The grinding roller device of this equipment needs to be replaced with new components after more than 500 hours of use, and all components inside the equipment must be cleaned. Damaged components should be replaced in a timely manner. The refueling tool can be operated in two modes: manual refueling pump and grease gun. When the bearing is found to be overheated, immediately remove and clean the surrounding accessories.