Six link magnetic stirrer

Introduction to HJ-6 Six Joint Magnetic Stirrer:
The six link magnetic stirrer is widely used in various universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgy, chemical, medical and other units. It is designed with two links, four links, six links, etc. according to the requirements of users. Enable users to obtain corresponding effects and data for multiple samples simultaneously. This instrument has good performance, low noise, and stirring, making it an ideal tool for laboratory technicians.

Product Features:
1. The shell is made of high-quality iron plate with electrostatic spraying, which is beautiful and generous
2. Adopting stepless speed regulation, it is more convenient to use
3. All six workstations are equipped with independent switches, making them more energy-efficient
4. Equipment operation is simple and safe to use

Technical Specifications:
1. Power supply voltage: 220V ± 10% 50Hz
2. Motor power: 10W x 6 for a single motor
3. Magnetic steel speed: up to 2000 revolutions per minute (infinitely adjustable)
4. Working face material: aluminum alloy
5. Working face size: Φ 120mm

Usage:
When using this instrument, first check if the accessories accompanying the machine are complete. Place the beaker that needs to be stirred in the center of the disc on the working surface, add the solution, and place the stirrer in the beaker solution. Then plug in the power plug of the instrument first, and turn on the power speed control switch. The indicator light will turn on, and the machine will start working. The speed control is gradually adjusted from low speed to high speed, and it is not allowed to start directly at high speed to avoid the stirrer not being synchronized and causing jumping. When not working, the power should be cut off. To ensure safety, please connect the ground wire when using. The instrument should be kept clean and dry to prevent severe vibration.

Precautions for use:
1. If you notice that the stirrer is jumping or not stirring during mixing, please cut off the power and check if the bottom of the beaker is flat and the position is correct. Please also test if the current voltage is between 220V plus or minus 10V, otherwise the above situation will occur.
2. The heating time should generally not be too long, intermittent use can prolong the service life.
3. The speed operation can work continuously for 8 hours, and the high-speed operation can work continuously for 4 hours.

For more information, you can also visit:http://www.jtchyq17.com http://www.chenghui18.com