Siemens inverter agent 6SE6430-2AD31-1CA0

Siemens inverter agent 6SE6430-2AD31-1CA0

Hunan Fadi Intelligent Technology Co., Ltd

SINAMICS V90 Siemens V90 frequency converter 6SL3210-5FB10-2UF1 single axis servo drive V90 is designed for motion control to meet general servo applications, fully considering the cost and market challenges faced by machine tool manufacturers and system integrators. V90 supports plug and play debugging, with fully optimized servo performance and fast integration with SIMATIC PLC, ensuring reliable performance. A servo system formed when used in conjunction with the new SIMOTICS S-1FL6 servo motor.

V90 supports internal setpoint position control, external pulse position control, speed control, and torque control, integrating pulse input, analog input/output, digital input/output, and encoder pulse output interfaces. Through real-time automatic optimization and automatic resonance suppression functions, it can be automatically optimized into a system that balances high dynamic performance and smooth operation. In addition, the pulse input supports 1 MHz, fully ensuring high-precision positioning.

Siemens inverter agent 6SE6430-2AD31-1CA0

SINAMICS V-ASSISTANT Debugging Tool is a PC software tool that can be connected to V90 through a standard USB interface. It can perform parameter settings, system optimization, trial operation, troubleshooting, and monitoring (such as tracking and measurement functions) and other related operations.

SIMOTICS S-1FL6 servo motor

1FL6 is a permanent magnet synchronous motor that can operate stably in an environment without external cooling equipment by dissipating heat from the motor surface. The self-locking quick plug connector makes motor installation easy and fast.

Three types of motor shaft heights: SH 45, SH 65, and SH 90mm

Rated speed: 2000 rpm/3000 rpm

Rated torque: 1.27 Nm~33.4 Nm

Available encoders: Incremental encoder 2500 S/R (13 bit resolution) and encoder (20 bit resolution)

Protection level: IP65, self cooling

Optional brake

Optional optical axis or key axis

The 1FL6, in conjunction with the SINAMICS V90 drive system, forms a powerful servo system. The motor supports 3 times overload and can be equipped with incremental or value encoders according to actual applications, which can fully meet your high requirements for dynamic performance, speed setting range, output shaft and flange accuracy.

All models of SINAMICS are based on the same technology platform. Common hardware and software components, as well as standardized design, configuration, and debugging tools, ensure a high degree of integration between all components. SINAMICS can cover the entire range of driving tasks. The various models of SINAMICS can be easily combined with each other.

Siemens Integrated Driver Systems (IDS) provides perfectly matched driver components that can meet your requirements. Throughout the entire process from engineering configuration, debugging to operation, the drive components will leverage their advantages as an integrated drive system: universal system configuration is done through the Drive Technology Configurator: simply select the motor and frequency converter, and design them using the configuration tool SIZER for Siemens Drives. The debugging tools STARTER and SINAMICS Startdrive also integrate motor data, which helps with efficient debugging. The integrated driver system is integrated into TIA BoZhong, which can simplify engineering configuration, debugging, and diagnosis.

The quality requirements that SINAMICS can meet. The various quality assurance measures taken throughout the development and production process ensure a consistently high level of quality for this series of products. Our quality management system has also been certified by an independent organization according to DIN EN ISO 9001 standards.

The use of SINAMICS A10 Siemens V90 frequency converter 6SL3210-5FB10-2UF1 is flexible and versatile, and has a wide range of applications. This drive series is equipped with SINAMICS S-1FK2 synchronous servo motor series to drive rotary or linear axes. The SIMOTICS S-1FK2 motor is designed with a matching interface for "One Cable Connection", so only one OCC cable is needed to easily connect the motor to the drive. In addition, the motor has an electronic nameplate from which the driver can read data, eliminating the need for motor data input during debugging. Electronic nameplates greatly simplify and shorten the debugging process. This servo drive system, in conjunction with the process functions in the upper controller, can solve a variety of driving tasks, from continuous operation, positioning, synchronization, to multi axis coordinated operation, to cam disc, interpolation, and so on. The SINAMICS A10 driver integrates a PROFINET communication interface for connecting to the upper controller. The data exchange between the driver and the upper controller adopts a standard protocol: PROFIdrive protocol is used during positioning operation; The PROFIsafe protocol is used in secure communication. Bus communication enables the effectiveness of solutions that use SIMATIC S7 automation system control drivers. The drive shaft is integrated into the SIMATIC S7 or SIMOTION controller through a "process object" or "motion control module".