Our factory specializes in producing large-scale hammer type multifunctional crushers, which can crush mineral and chemical waste materials such as coal blocks, bones, branches, wooden blocks, wood plastic boards, PVC scraps, gypsum mines, and construction waste such as calcite, limestone, coal slag, slag, gangue, and construction waste from brick and tile factories. The coarse and fine crushing can be adjusted through a sieve.
The crusher has a complete range of models, including PS600, 800, 1000, and more, which can also be customized according to needs
PS600 crusher is equipped with a 22KW motor, with an hourly processing capacity of 2-5 tons
Hammer crusher is a crushing machinery that uses the high-speed impact of the hammer head to perform intermediate and fine crushing operations on materials. The hammerhead is hinged to a high-speed rotating rotor, and a grate is installed at the lower part of the body to control the particle size of the discharge. The material fed into the crusher is first crushed by the impact of the high-speed hammer head, and at the same time gains kinetic energy, flying at high speed towards the crushing plate on the inner wall of the casing and being crushed again. The material smaller than the gap between the grates is discharged outside the machine, and the material blocks larger than the gap between the grates are again impacted and ground by the hammer on the grates until they are discharged after being smaller than the gap between the grates.
Hammer crusher has the advantages of high crushing ratio, uniform discharge particle size, less over crushed material, and low energy consumption. However, due to the rapid wear of the hammer head, its application in crushing hard materials is limited; In addition, due to the fear of blockage, grates are not suitable for crushing materials with high humidity and clay content. This type of crusher is usually used to crush brittle materials below medium hardness, such as limestone, shale, coal, gypsum, chalk, etc. Replacing the hammer head of the hammer crusher with a steel ring ring ring coal crusher is a variation of the hammer crusher. It utilizes the combined effect of high-speed impact and low-speed rolling to crush materials, thus obtaining finer products. It is mainly used to crush coal for power plants, but can also be used for crushing gypsum, salt chemical raw materials, and some medium hard materials.
