Shanghai Rain Test Chamber Manufacturer

Rain Test Chamber

Performance indicators/can be customized according to customer requirements

model

RT-1000

Sample limitations

This testing equipment prohibits the testing of samples containing flammable, explosive, and volatile substances; Test for storing corrosive substance samples, test for storing organisms, test for storing strong electromagnetic emission source samples, and storage

Volume, weight, and size

Nominal internal volume

1000 L

Effective size of inner box

W1000×H1000×D1000mm

Outer box size

Approximately W1600 × H1950 × D1450mm

weight

About 350kg

operating noise

≤ 75db measured at a distance of 1.5 meters from the machine and 1.5 meters from the ground in front of the machine

circuit breaker

63A

Operating voltage

AC220V； 50/60HZ; 1 phase 3 wires; 6 square copper core wire

Sample power supply

(This item is for purchase)

1. Configure DC: 12V; 24V；36V； 20A DC power supply

2. Reserved power interface terminals, customers can configure them themselves

3. Install waterproof sockets in the test chamber, with a power supply of AC220V; 20A

Power supply conditions

And power supply

AC220V single-phase; The allowable voltage fluctuation range is 5%;

The allowable frequency fluctuation range is 50/60HZ;

The grounding resistance of the protective grounding wire is less than 4 Ω

Require users to configure corresponding capacity air or non melting wire switches for the equipment at the installation site, and this switch must be independently controlled. When placing powered samples in the equipment use box, please use an external power source for the sample power supply and do not directly use the local power supply;

Performance and technical indicators:

Environmental conditions for use

The value measured under the conditions of ambient temperature of 5 ℃~30 ℃, relative humidity ≤ 85% (non condensing), and no sample in the test chamber.

Water temperature range

Standard machine spray water temperature is not controlled; Using ambient temperature,

You can choose the water temperature control type according to your needs, and the water temperature can be controlled between RT+15 ℃~75 ℃ (optional)

Spray volume

1.2～2.5L/min

Spray method

Swing pipe spray mode

Pipe size

Swing the tube at 180 °; Semi-circular pendulum tube

The inner diameter of the swing pipe is Φ 16mm,

Swing tube radius: R400 mm

swing angle

Swing 175 ° left and right from the center point, for a total of 350 °; The angle within this range can be set arbitrarily

Control method of swing pipe

Using human-machine interface input, PLC output controls the * * * motor and absorbs feedback signals from servo motors to control the angle of the pendulum tube

Spray swing pipe cycle

Adjustable from 3 to 12 seconds

Test turntable speed

1~20r/min adjustable

Test turntable load-bearing capacity

≤50kg

Test turntable size

∮350mm

Nozzle arrangement

The nozzles are distributed on 90 ° arcs on both sides of the vertical plane, with a center to center distance of 50mm between the nozzles

Turntable height

Adjustable according to product size

nozzle diameter

Inner diameter 1.2mm

Fixed test sample

(Purchase)

Test sample fixtures can be customized according to product shape and size

(Customers need to provide detailed size drawings or physical samples)

Test meets the conditions

IP3～IP4

GB/T 2423.38-2006/IEC 60068-2.18:2000 Part Two: Swing Pipe Spray Test Method

GB4208-2008/IEC60529-2001 Degrees of Protection Provided by Enclosures

box structure

Inner box material: 304 # stainless steel 1.0mm thick

Outer box material: cold-rolled steel plate 1.0mm thick baked paint treatment or 304 # stainless steel 1.0mm thick (optional)

The control box and test box are integrated

The height of the test piece support turntable installed at the bottom of the test box can be adjusted