-
E-mail
2131784470@qq.com
-
Phone
13538469076
-
Address
Jinhui Industrial Park, Dongcheng District, Dongguan City, Guangdong Province
Guangdong Aisili Testing Instrument Co., Ltd
2131784470@qq.com
13538469076
Jinhui Industrial Park, Dongcheng District, Dongguan City, Guangdong Province
Manufacturer of Aerospace Rain Test ChamberRequirements for environmental conditions for use:135 # 3846 # 9076 Bears
Environmental temperature: 2-55 ℃
Environmental humidity: 0-85%
Power requirements: AC 380 (± 10%) V/50HZ three-phase five wire system
Pre installed capacity: 2.0KW
There are no corrosive gases, strong vibration sources, or strong electromagnetic fields around

AsliManufacturer of Aerospace Rain Test ChamberAttention should be paid to maintenance and inspection. If any abnormal operation of the equipment is found, it should be stopped immediately for inspection. After identifying the cause and solving the problem, the test can continue.
If the device runs for a long time and the spray hole is found to be blocked, the pipeline must be removed, rinsed with tap water, and then reassembled;
When the equipment is not in operation, it should be kept dry, the running water should be drained, and the workshop and box should be wiped dry;
Before operating the equipment, check if there is sufficient water in the water tank. If not, fill it up with clean tap water to avoid damaging the water pump;
If you hear any abnormal noise during operation, please stop the machine for inspection and wait for the fault to be found and resolved before restarting to avoid affecting the equipmenttest chamberservice life;
◆ To prevent dust from entering the equipment, cover it with a plastic outer cover after use;
Check the circuit control system before each startup;
Confirmation of power supply and grounding wire;
Is the power cord properly connected according to specifications and grounded;
Ventilation fans should be installed in the laboratory to maintain indoor ventilation;
The wastewater discharge system of the equipment must be installed in place;
After the experiment is completed, cut off the power supply of the whole machine;
After each experiment, the sample should be taken out and the inner container of the equipment should be cleaned thoroughly;
Non professionals are strictly prohibited from operating this equipment;
◆ Keep the appearance of the box clean;
◆ Avoid external impact on equipment;
◆ Chemical contact with this equipment is prohibited;
Maintain a dry environment in the laboratory.

Manufacturer of Aerospace Rain Test Chamber(:)Which brand is good? Aisili brand is yourscanThe selected brand not only has high-quality products, but also comprehensive after-sales service, allowing you to buy with confidence and use with satisfaction.