Sell second-hand unsaturated resin reaction kettle

Sell second-hand unsaturated resin reaction kettleThe reaction storage of materials in industry requires corresponding equipment. Glass lined reaction vessels are chemical reaction equipment with high requirements for corrosion resistance and safety performance. However, there will always be some problems after use. Leakage is a common and serious problem in reaction vessels. If corrosive or toxic substances leak, the consequences will be unimaginable. Improper positioning of the oil ring or blockage of the oil circuit can prevent the formation of an oil seal, leading to leakage; The pressure cap of the reaction kettle is not tightly pressed, and poor packing quality can also affect the sealing performance; The mixing shaft may experience wear or corrosion at the packing, resulting in excessive clearance and leakage. At this point, it is necessary to adjust the position of the oil ring and clean the oil circuit; Tighten the packing or replace the packing; Replace the mixing shaft, etc.

Sell second-hand unsaturated resin reaction kettleIt is mainly used to operate various reactions of corrosive liquids, so its operation requirements are relatively high. When operating, attention should be paid to meeting production requirements and carrying out production work while ensuring safety. Below, we will introduce the requirements for starting work

1. Feed according to the process operation procedures and start the mixing operation;

2. The enamel reaction kettle must strictly follow the process operation procedures during operation, and it is strictly prohibited to operate at excessive temperature, pressure, or load; In case of abnormal situations such as overheating, overpressure, and overload, corresponding measures shall be taken immediately according to the process regulations. Prohibit reactions exceeding the specified liquid level in the pot;

3. Strictly follow the material ratio specified in the process, and evenly control the feeding and heating rate to prevent severe reactions in the kettle caused by incorrect ratio or too fast feeding, resulting in abnormal situations such as overheating, overpressure, overload, etc., which may cause equipment safety accidents.

When heating or cooling the enamel reaction kettle, the operation must be smooth to avoid sudden superposition of temperature difference stress and pressure stress, which may cause deformation or damage to the equipment;

5. Strictly implement the handover management system, include the operation and condition of equipment in the handover, and prevent abnormal situations and equipment accidents caused by unclear handover.

Liangshan Hongrui Machinery Equipment Co., Ltd. mainly recycles and sells; Used chemical equipment, pharmaceutical equipment, concentration equipment, biological fermentation extraction equipment, food equipment, dairy equipment, drying equipment, separation equipment, starch equipment, feed equipment, oil and fat equipment, stainless steel equipment, etc., mainly including various second-hand reaction vessels, fermentation tanks, dryers, centrifuges, separators, evaporators, storage tanks, pressure filters, condensers, extraction tanks, freeze-drying machines, etc