Selection of Angle Seat Valve Manufacturers

Selection of Angle Seat Valve ManufacturersTechnical Specifications:

Pipeline pressure: Max1.6Mpa (232psi)

Control pressure: 0.3-0.8Mpa (43.5-116psi)

Control medium: neutral gas or air

Valve body material: CF8M/CF8 (SS316, SS304)

Sealing material: polytetrafluoroethylene

Cylinder material: Plastic PPS

Cylinder size: 27mm, 32mm, 40mm, 50mm, 63mm,

80mm，100mm，125mm

Applicable media: water, alcohol, oil, dyes, steam, neutral gases or liquids, organic solvents, acid-base solutions

Medium temperature: -10 ℃ -+180 ℃, 25 ℃ -+220 ℃

Environmental temperature: -10 ℃ -+80 ℃

Control form: single acting normally closed, normally open, double acting normally closed, double acting free state

Connection types: threaded, welded, flanged, quick install

Selection of Angle Seat Valve Manufacturerssummary:

Widely used for short-term frequent start-up, it has the characteristics of sensitive response and accurate action. When used in conjunction with solenoid valves, pneumatic control can accurately control gas and liquid flow rates. It can meet the requirements of accurate temperature control and liquid dripping. The wet heat sterilization cabinet should use angle seat valves to control steam volume and temperature accurately.

Selection of Angle Seat Valve ManufacturersFeatures:

1. It has valve open or closed position display.
2. External pneumatic pilot can increase service life and is maintenance free.
3. There is a self-adjusting sealing cover between the overflow port and the slider, which can improve the sealing performance.
4. The valve body corner seat structure can achieve high flow (especially compared with ordinary globe valves), with a compact structure and fast response.

Type:

Press the actuator
Plastic actuator angle seat valve
Stainless steel actuator angle seat valve
by temperature
Room temperature type (up to 200 degrees Celsius)
High temperature type (up to 300 degrees Celsius)