High temperature angle seat valve supply

High temperature angle seat valve supplyTechnical Specifications

Pipeline pressure: Max1.6Mpa (232psi)

Control pressure: 0.3-0.8Mpa (43.5-116psi)

Control medium: neutral gas or air

Valve body material: CF8M/CF8 (SS316, SS304)

Sealing material: polytetrafluoroethylene

Cylinder material: Plastic PPS

Cylinder size: 27mm, 32mm, 40mm, 50mm, 63mm,

80mm，100mm，125mm

Applicable media: water, alcohol, oil, dyes, steam, neutral gases or liquids, organic solvents, acid-base solutions

Medium temperature: -10 ℃ -+180 ℃, 25 ℃ -+220 ℃

Environmental temperature: -10 ℃ -+80 ℃

Control form: single acting normally closed, normally open, double acting normally closed, double acting free state

Connection types: threaded, welded, flanged, quick install

High temperature angle seat valve supplyfeature

1. Visual position indication: can be connected to limit switches or emergency manual devices.
2. Easy to install: The pneumatic control head can rotate 360 ', and even the limit switch can rotate 360'. One to two limit switches can be easily installed.
3. Pneumatic controller: thickened engineering plastic shell, safe and reliable. Low wear piston structure with large capacity and low air consumption. Internal components are self-lubricating and maintenance free.
4. It has multiple control modes: normally open, normally closed, and double acting.
5. Require smaller pneumatic actuators: When fluid flows in from above the valve stem, the head should be stopped.
6. Easy to connect: MAMUR standard connection, embedded metal joint. Choose a smaller control head.
7. Long life guide rod: The valve stem is sealed with PTFE (PTFE) to prevent dirt from entering. Self lubricating, maintenance free. The valve stem has been specially treated to ensure optimal fixation and can automatically correct its position.
8. No water hammer effect: When fluid flows in from below the valve stem, water hammer (water impact force) is absorbed.
9. Valve body mechanism: The flow rate is 30% higher than that of ordinary corner seats, the volume is smaller, and the fluid flow state is better. Stainless steel 316 valve body, PTFE seal, high temperature resistance, corrosion resistance. The single acting angle seat valve has the advantages of simple structure, beautiful appearance, quick assembly and disassembly, quick opening and closing, flexible operation, low fluid resistance, and safe and reliable use.
10. All steel components are made of acid resistant stainless steel materials, and the seals are made of food grade silicone rubber or polytetrafluoroethylene materials, which comply with food hygiene regulations. Widely applicable to many industries such as food, brewing, beverages, dairy products, fine chemical pharmaceuticals, and biotechnology.
11. Scope of application: Used in filling equipment, beer and beverage, textile printing and dyeing, medical equipment, biopharmaceuticals, disinfection and sterilization, food industry, rubber and plastic machinery, HVAC, etc.

High temperature angle seat valve supply