Second hand rotary cutting machine

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The second-hand rotary medicine cutting machine is equipped with a single-phase motor, high-end bearings, and four blades installed on the disc. It has a slow speed ratio and high slicing efficiency. The slicing thickness can be adjusted, and it is widely used in traditional Chinese medicine pharmacies, drugstores, Chinese medicine processing plants, etc. This machine has the characteristics of small size, high efficiency, easy operation, exquisite and beautiful appearance, and is both energy-saving and safe.

Product Details

Second hand rotary cutting machine

A cutting machine is a device that can cut Chinese herbal medicine into slices or blocks and adjust the thickness.

Chinese name

Cutting machine

Power

0.37kw

Slice frequency

560 pieces/min

Motor speed

1400 revolutions per minute

slice thickness

0.2-3mm

weight

12.5KG

Voltage

220V

Overall dimensions

300×180×240

The cutting machine has good stability, high precision, easy operation, and continuous and uniform slicing.

Instructions for Use

This machine adopts single-phase matching, uses high-end bearings, and is equipped with four blades on the disc. The speed ratio is slow and the slicing efficiency is high. The slicing thickness can be adjusted, and it is widely used in traditional Chinese medicine processing plants. This machine has the characteristics of small size, high efficiency, easy operation, exquisite and beautiful appearance, and is both energy-saving and safe.

Instructions for use

1. Adjustment: When adjusting, first loosen the fixed copper column nut, then rotate the nut to adjust the thickness direction on the copper column. After adjusting the thickness, the nut must be tightened to the copper column. If the disc is parallel to the blade, do not turn on the machine. The cutterhead must be lower than the blade in order to start cutting. Adjust the thickness to about 3mm, and the thickness can be infinitely adjusted.

2. Replace blade: Insert the hexagonal handle into the hole on the side of the machine. Rotate to adjust the direction of the wheel before changing the knife. When changing the knife, loosen the two hexagonal screws of the blade and insert the blade for replacement.

Precautions

1. The knife basin should be regularly oiled to avoid sticking dirt. If there are pills with tails or fine fragments, it indicates that the softening is not appropriate or the blade is not sharp, and must be replaced or sharpened. It's too thin to cut properly.

2. Slices of sticky medicines such as sweet clouds, raw earth, ginseng, gastrodia elata, etc., with water on the surface for cutting.