Scale maintenance in Huishan District

Scale maintenance in Huishan District

Real time clock, unaffected by AC power outages

Dynamic detection, digital filtering, and automatic zero tracking function

Zero setting, peeling, clearing, peeling, micro printing and other functions

Keyboard settings and calibration

Print daily reports, classified statistical reports, various general reports, and reports on the working parameters and standards of displays

Personalized printing of Chinese characters: Users can create their own scale printing format according to their preferences, and can print Chinese characters for product names, etc

Axle load accumulation function: A small range weighing scale can also weigh large tonnage vehicles

Automatic switching of division values: higher display accuracy

Self diagnostic function: multiple error message prompts and alarms

Scale maintenance in Huishan District

Main process flow:

1. The groove press machine presses grooves, with rounded chamfers and no 90 degree rigid right angles, and is also connected to a triangular structure.

2. The U-shaped beam is made of cold-rolled steel plate not less than 6mm; The panel is made of Q235 steel plate.

3. Mechanical processing workshop, complete processing equipment, self-produced accessories, customized special structures.

4. The automatic welding machine performs full welding, and during the welding process, the oxygen inside the U-shaped beam is completely consumed, using an inert environment to avoid internal corrosion.

5. The welding of the seam in the board adopts track submerged arc welding, and the groove welding is formed in one go, with no bubbles, strong and beautiful appearance.

The welding of parts adopts CO2 shielded welding and full welding. No spot welding or virtual welding. Ensure the strength of the connectors and use them without fatigue deformation.

Sandblasting machine removes the oxide layer by sandblasting to ensure paint adhesion.

The top coat of the weighing platform is sprayed twice and air dried. Optional spray paint is available, with strong adhesion. All connectors are galvanized.

9. Bottom and surface technology of the scale body *, sandblasting rust removal, water-based rust prevention, water-based rust prevention primer, and two coats of topcoat. The structure has anti rodent bite design.

The connection of the weighing platform adopts meniscus structure overlap, and the physical principle automatically locks and adjusts. The connecting components (pressure plate, ball bowl) on the sensor are firmly welded to the scale body.

The sensor position is reasonable, and the sensor is placed in the center at the overlap to eliminate the pole effect and ensure uniform force distribution of the sensor under unbalanced load.

During the factory inspection, an overload test is conducted on the concentrated load of the scale body to ensure that the angular deformation of the scale body is less than 1mm for every 50t increase in weighing, and the rebound rate is 100%. After continuous full weighing and rolling for 50000 hours, the scale body has no fatigue deformation. The secondary weight of 200t can simultaneously handle factory calibration, on-site inspection, and maintenance.

⒔ Modular structure, easy and fast on-site installation, ready to use after installation. Each region has a 100% pass rate for one barrel inspection.