SZX-J210 Vibration Monitoring Instrument

SZX-J210 Vibration Monitoring Instrument

Introduction:SZX-J210 Vibration Monitoring InstrumentMatching type magneto electric vibration velocity sensor and vibration acceleration sensor can measure the amplitude and intensity of bearing vibration in various rotating machinery. Suitable for the system design and use of TSI rotating mechanical devices, it can be widely applied in industries such as power, machinery, chemical, metallurgy, etc. Provide multiple parameter measurements and early fault prediction for the safe operation of rotating machinery

• Main functions:

Monitoring and protection of bearing vibration in rotating machinery such as steam turbines, coal mills, fans, reducers, water pumps, centrifuges, balancing machines, and air compressors.

• Function Description:
  • The measured value and alarm set value can be displayed separately on the LED digital tube.
  • When the alarm setting value is exceeded, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment. The alarm setting delay can be adjusted within the range of 1-60 seconds to prevent false alarms caused by on-site interference..
  • Equipped with a current output interface, it can be connected to devices such as computers, DCS, PLC systems, and paperless recorders.
  • It has power up and power down detection functions, sensor disconnection detection functions, and cuts off alarm and shutdown output circuits, effectively suppressing instrument false alarms.
  • The vibration intensity (vibration intensity) and vibration amplitude (vibration displacement) can be freely switched.

• Electrical indicators:

• Sensor input: magneto electric speed sensor or vibration acceleration sensor
• Measurement range: 0-500 μ m pk pk

0～50.0mm/s rms

• Measurement accuracy: Linear error ≤± 1% (full-scale value)
• Display mode: digital tube display
• Frequency response: 1.0-300Hz
• Current output: 4-20mA; drives a load of 500 Ω
• Alarm contact capacity: AC220V/3A, DC28V/3A
• Working power supply: 220VAC ± 10% 50Hz power consumption ≤ 10W
• SZX-J210 Vibration Monitoring Instrument