SZCB-02 Reluctance Speed SensorSZCB-02 Reluctance Speed Sensor

It can convert angular displacement into electrical signals for counter counting, and can measure various magnetic materials such as gears, impellers, and perforated (or slotted) materials without contact、The rotational speed and linear velocity of the screw disc.

Sensors have: small size、solid and reliable、long lifespan、It has the advantages of not requiring power and lubricating oil, and can be used with general secondary instruments.

Used for speed acquisition.

It can convert angular displacement into electrical signals for counter counting, and can measure various magnetic materials such as gears, impellers, and perforated (or slotted) materials without contact、The rotational speed and linear velocity of the screw disc.

Sensors have: small size、solid and reliable、long lifespan、It has the advantages of not requiring power and lubricating oil, and can be used with general secondary instruments.

Used for speed acquisition.

CS-2 speed sensor

Shanghai Rotary MachineCS-2 speed sensorcanMeasure the vibration or relative vibration of various rotating machinery, such as bearing vibration, casing vibration, frame vibration, and monitor the vibration changes caused by rotor imbalance, misalignment, loose parts, damaged ball bearings, gear damage, etc., and convert them into standard 4-20mA current signals, which are sent to PLC and DCS systems. Equipped with LCD display function.

CS-2speed sensorFor active three wire sensors：
1. The sensors are labeled with positive input, negative COM, and power supply terminals, which are suitable for DC+12V~24V
2. Rotating mechanical equipment requires one CS-2 sensor to measure positive rotational speed; If it is necessary to measure the reverse speed, use two CS-2 sensors

3. The CS-2 sensor can measure forward or reverse rotation, and the two sensors can be interchanged. When installed, they are clamped at a 90 degree angle, and the end face of the sensor is perpendicular to the tooth being measured
Wheel surface, installation distance: between 1.0-1.5mm
4. Gear material requirements: Various magnetic conductive steel materials are acceptable
Gear module: 1.5 or above is sufficient
5. Measurement object: 1 slot, 3 teeth, 30-120 teeth can be customized by the user
6. Sensor installation thread: M16 × 1
The length of the sensor screw tube L: 60-200mm can be customized by the user
7. The sensor leads are labeled: positive input, negative COM, and power supply DC+12V should be connected to the instrument terminals accordingly
CS-2 typespeed sensorFeatures:
1. Inductive iron metal targets
2. Digital current sink output collector open circuit
3. Better signal-to-noise ratio than magneto electric sensors
4. Excellent low-speed and high-speed performance, output signal above 0-100KHz, amplitude independent of speed
5. Anti electromagnetic interference