-
Phone
13917099436
-
Address
No. 218 Xianju Road, Jinshan District, Shanghai
Product Categories
Shanghai Soting Intelligent Equipment Co., Ltd
ST-SDN1/2 Dual Power Centrifugal Nano Sand Mill Rod Pin Lithium Battery Special
NegotiableUpdate on 01/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
coating
Product Details
Product Introduction:
This product adopts a dual power structure, with a narrow grinding area and concentrated grinding energy in the rod tip grinder. It is one of the few machines with stable mass production in the field of ultrafine and nano materials. The machine has good grinding performance, high output, low energy consumption, and high stability.
Product features:
1. Dual power, material grinding and material separation operate independently;
2. Designed using the principle of (net free) centrifugal separation;
3. No metal screen mesh, minimal material pollution; At the same time, it reduces the trouble of replacing the screen mesh while ensuring that the discharge device is not worn outThis ensures the passability of materials and prevents blockages, ensuring the stability of the machine's long-term operation, especially inThe advantage is more obvious when grinding materials with expansion properties, avoiding defects such as clogging and deformation of the screen mesh in traditional equipment.
4. The use of centrifugal separation technology can prevent the occurrence of broken balls blocking the discharge separator due to wear of zirconium balls.
5. Cyclone separator: After shutdown, a small amount of zirconium balls diffuse into the centrifugal separator. Each time the centrifugal separator is startedThe trace zirconium balls inside flow out into the air separator, and the cyclone separator performs secondary separation to collect the trace zirconium balls that flow out,It can be manually discharged at any time. This equipment is designed to have an online zirconium ball device during machine operation.
6. Can use beads larger than 0.05mm;
7. Special materials are selected for the separation structure, which are wear-resistant, stable, and have low operating costs;
8. The tip grinder has a narrow grinding area and concentrated grinding energy. Only the high-efficiency grinding area is used to grind the product, resulting in low energy consumptionThe product has a narrow particle size distribution, good grinding effect, and high efficiency. The cooling and heat exchange area is large, and in addition to cooling the grinding barrel, there is also an additional outletThe internal cooling of the feeder increases the heat exchange area by 30-50% compared to other similar models, which can effectively control the temperature of the material during grinding and ensureProve the quality and material performance of the product, avoid the ineffective grinding area of traditional equipment, and improve grinding efficiency.
9. Grinding core structural components with different materials selected for low wear and low operating costs;
10. The mechanical seal is a double end mechanical seal, equipped with mechanical seal cooling and pressure monitoring alarm devices to protect the stability of the mechanical sealEnsure reliable operation.
11. Configure monitoring and fault alarm for discharge temperature and grinding chamber pressure, and add flow monitoring and fault alarm at the discharge portAlarm, providing secondary protection for the entire system process; The accuracy of the pressure gauge is level 1.5;
12. Installing a stable flow control system for material conveying to avoid the drawback of excessive pressure fluctuations in traditional equipment chambers and reduceLow probability of ball leakage.
13. To ensure that the material is controlled at a lower temperature, a condenser can be optionally equipped to reduce the temperature of the material entering the grinding chamber;
14. The circulating pump is an Ingersoll Rand double diaphragm pump from the United States, with stable and adjustable flow rate, low failure rate, and long service life.
15. It is one of the few machines with stable mass production in the field of ultrafine and nano materials. The machine has good grinding performance, high output, low energy consumption, and stabilityQualitative high.
working principle:
Designed using the principle of (net free) centrifugal separation, centrifugal separation has an independent power motor. During machine operation, most of the grinding zirconium balls are distributed around the grinding chamber and move in the same direction as the object due to the centrifugal force of the disperser. A small amount of zirconium balls and materials rotate around the separator. When the separator rotates at high speed, the centrifugal force generated by the zirconium balls is greater than the pressure generated by the pump on the zirconium balls in the chamber, causing the zirconium beads to stay in the grinding chamber. At the same time, when the separator rotates at high speed, the centrifugal force generated by the material is less than the pressure generated by the pump on the material in the chamber, forcing the material to flow out of the separator.
Application areas:
Application: Lithium iron phosphate battery positive and negative electrode materials, digital inkjet ink, alumina, zirconia, silicon carbide, titanium dioxide, calcium carbonate, iron oxide, yttrium oxide, indium, cerium, pearl powder, pharmaceutical preparations, offset printing ink, screen printing ink, concentrated ink, ultraviolet printing ink, concentrated ink, ultraviolet printing ink, gravure printing ink, rubber relief printing ink, water-based printing, ink. Automotive coatings, coil steel coatings, anti-corrosion coatings, wood coatings, screen printing inks, plastic solvent inks, textile pigments, water-based printing pastes, electronic industry pastes, latex paints, carbon black, titanium dioxide, water-based wood coatings, solvent based wood coatings, pesticide suspensions, latex paints, sulfur, zinc oxide, gravure inks, flexographic inks, papermaking, calcium carbonate, fillers, car paints and car repair paints, special inks, water-based printing pastes, carbon black paste textile pigments, submicron grinding, electronic industry pastes, ship paints, electrophoretic paints, metal paints, coil steel paints, water-based wood coatings, solvent based wood coatings, pesticide suspensions, latex paints, sulfur, zinc oxide, gravure Ink, flexographic ink, papermaking, calcium carbonate, fillers, leather.
Product parameters:
| model | Volume (L) |
Main motor power (KW) |
Separate motor power (KW) |
Medium (mm) | Weight (KG) | Dimensions (mm) |
| STNSD1 | 1 | 4 | 7.5 | 0.05 or above | 800 | 1080x730x1500 |
| STNSD2 | 2 | 4 | 7.5 | 0.05 or above | 800 |
1080x730x1500 |
