SP stainless steel deep well submersible pump

1、 Product Overview of SP Stainless Steel Deep Well Submersible Pump:

　　SPStainless steel deep well submersible pumpUsing efficient hydraulic models to design impellers saves operating costs. The motor and water pump are vertically connected, requiring only a small installation space. Installing a check valve above the pump body can prevent the water pump from being impacted by water during power outages. Flexible assembly of water pump components according to different flow and head requirements. The pump body and motor are both made of stainless steel material, which has good corrosion resistance and will not cause secondary pollution. Due to the pump body being placed in water, the noise generated is very low. We provide a series of stainless steel water pumps with different voltages (380V/220V) and (50HZ/60HZ). 0.5-380m3／H。 The water pump is lightweight, easy to transport, and has low assembly costs, greatly saving installation and maintenance costs. All bearings are water lubricated, and the rectangular bearing channels allow sand particles to be discharged simultaneously with the extracted liquid.

　　SPStainless steel deep well submersible pumpThe inlet filter can prevent particles and large particles exceeding the specified quantity from entering the pump body.

IISPStainless steel deep well submersible pumpThe main purpose is:

This system is suitable for the circulation and pressurization of clean water and softened water;
This series is made of 304 stainless steel, which has good corrosion resistance. It is also suitable for pumps made of slightly alkaline water, demineralized water, and can be customized with 316 stainless steel and fluororubber.

IIISPStainless steel deep well submersible pumpUsage conditions:

　　SPStainless steel deep well submersible pumpA thin, clean, non corrosive liquid that does not contain solid particles or fibers;

Liquid temperature: 20 ℃;
PH value: 6.5~8.5;

4SPStainless steel deep well submersible pumpPerformance parameters: