SM-200 Particle Abrasion Tester

SM-200 Particle Abrasion Tester

Introduction to the principle of SM-200 particle abrasion tester

This equipment is mainly used for measuring the wear rate of artificial ceramic filter media and industrial activated alumina for water treatment. It is a multifunctional wear measurement device.

Main technical parameters and configuration

1. Speed setting: 25 ± 1 times/minute,

The number of rotations can be set to 1000 times,

Speed 30 ± 1r/min, adjustable,

Rotation time: 1 to 99 minutes, adjustable,

Vibration frequency: 1 time/s-30 times/s, adjustable,

Time: 1 second to 99 minutes, adjustable;

2. Specification of grinding cylinder: Φ 50 × L300mm, d36 × 300mm, made of stainless steel material, internal roughness: R3.2;

3. Power supply: 220V/50HZ, power ≤ 1.5KW;

4. The test method meets the technical requirements of CJ/T299-2008, HG/T3927-2008, and GB/T1054-2008;