SLMCD-21T integrated vibration transmitter rotary board

SLMCD-21T integrated vibration transmitter rotary boardIntegrating magneto electric vibration sensors and precision measurement circuits together to form a high-precision vibration measurement system, this transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for measuring the vibration of factory equipment such as fans, motors, water pumps, etc. SLMCD-21T integrated vibration transmitter rotary board

2．1Frequency response:10～1000 Hz*Or 5～1000 Hz(Special note)

2．2Natural frequency: 10Hz

2.3 Measurement Range：0-20mm/s

2.4 Output current: 4～20mA

2.5 Output impedance:≤500Ω

2.6 Working voltage: DC12-24V ± 10%

2.7 Wiring method: 2-wire system

2．7High acceleration: 10g

2．8measurement direction: Vertical or horizontal

2．9Usage environment: Temperature-40℃～80℃relative humidity≤90%

2．10Dimensions: φ33mm×75mm

2.11 Installation thread: M10 × 1.5 × 10mm (depth)

2．12Weight: Approximately324g

3．1 Installation position: Vertically installed on the measured vibration point, place the sensor at the bottomMFix the 10 × 1.5 × 10 screws on the tested housing, and then tighten the transmitter on top.

3．2 Installation dimensions and specifications: If the installation position of the transmitter is subject to high temperature steam erosion, protective measures need to be taken to reduce the ambient temperature of the transmitter. Generally, no protection is required.

3．3 Wiring instructions: The brown wire is connected to the positive terminal of the DC24V power supply, and the black wire is connected to the 4-20mA output,.The connecting wire requires good insulation performance, and adoptstwoCore shielded cable.