SICK Encoder Jiangxi

SICK Encoder Jiangxi
SICK encoder ATM60-A4A12X12 performance
Maximum stride per lap 8192
SICK encoder ATM60-A4A12X12zui large number of turns 8192
Resolution range 8192 x 8192
SICK encoder ATM60-A4A12X12 resolution 13 bit x 13 bit
SICK encoder ATM60-A4A12X12 error limit ± 0.25 °
SICK encoder ATM60-A4A12X12 with a repetition accuracy of 0.1 °
Initialization time 1050 ms 1)
Location data generation time 0.15 ms
1) Afterwards, the valid position can be read
SICK encoder ATM60-A4A12X12 offers value for money
SICK encoder ATM60-A4A12X12 electrical parameters
Connection type M23 plug, 12 pin, radial
Working voltage range 10 V... 32 V
Maximum power consumption (no-load) ≤ 0.8 W
SICK encoder ATM60-A4A12X12 polarity reverse protection?
MTTFd: Hazard Failure Interval of 150 Years (EN ISO 13849-1) 1)
1) This product is a standard product, not a safety component made according to mechanical instructions. Calculate the rated load based on components, average ambient temperature of 40 ° C, and usage frequency of 8760 hours per year. All electronic malfunctions are considered hazardous faults. For detailed information, please refer to document number 8015532
SICK encoder ATM60-A4A12X12 mechanical parameters
SICK encoder ATM60-A4A12X12 mechanical interface solid shaft, clamping flange
Shaft diameter 10 mm x 19 mm
Axis length 19 mm
SICK encoder ATM60-A4A12X12 weighs 0.5 kg
SICK encoder ATM60-A4A12X12 material, shaft stainless steel
SICK encoder ATM60-A4A12X12 material, flange aluminum
Material and shell die cast aluminum
Starting torque with shaft seal 2.5 Ncm
Starting torque without shaft seal 0.5 Ncm
Working torque with shaft seal 1.8 Ncm
Working torque without shaft seal 0.3 Ncm 1)
Allow axle load
3SICK encoder ATM60-A4A12X1200 N/radial
50 N/axial direction
Moment of inertia 35 gcm?
Bearing service life 3.6 x 10 ^ 9 turns
Is the maximum angular acceleration ≤ 500000 rad/s?
SICK encoder ATM60-A4A12X12 working speed 6000/min 2)
1) Customers can remove the shaft seal themselves
2) When operating within the specified working temperature range, the self heating at a speed of 1000 revolutions per minute is 3.3 K
environmental parameters
Electromagnetic compatibility according to EN 61000-6-2 and EN 61000-6-3
Shell protection level
IP 67, Use shaft sealing ring (according to IEC 60529 standard) 1)
IP 43, Non shaft sealed, non sealed encoder flange (according to IEC 60529 standard) 1)
IP 65, Shaftless seal, sealed encoder flange (according to IEC 60529 standard) 1)
Allow relative humidity of 98%
Working temperature range -20 ° C...+85 ° C
Storage temperature range -40 ° C...+100 ° C, unpackaged
Impact resistance of 100 g, 6 ms (according to EN 60068-2-27)
Anti vibration capacity 20 g, 10 Hz... 2000 Hz (according to EN 60068-2-6)
1) Install the matching plug
SICK encoderJiangxi

SICK proximity sensor IME08-02BPOZT0S product features
Design and Construct Metric Design
Shell shape standard
SICK proximity sensor IME08-02BPOZT0S thread size M8 x 1
SICK proximity sensor IME08-02BPOZT0S diameter? 8 mm
Trigger sensing distance Sn 2 mm
SICK proximity sensor IME08-02BPOZT0S safe connection distance Sa 1.62 mm
SICK proximity sensor IME08-02BPOZT0S installed flush with metal
Switching frequency 4000 Hz
Connection type plug, M8， 3 needles
SICK proximity sensor IME08-02BPOZT0S switch output PNP
Output function opening is normally closed
Electrical specification: DC 3 cable
Shell protection level IP 67 1)
1) According to EN 60529
SICK proximity sensor IME08-02BPOZT0S mechanical/electronic parameters
Supply voltage 10 V DC... 30 V DC
SICK proximity sensor IME08-02BPOZT0S residual ripple ≤ 10%
Voltage drop ≤ 2 V 1)
SICK proximity sensor IME08-02BPOZT0S current consumption ≤ 10 mA 2)
The delay before the proximity sensor starts working after being powered on is ≤ 100 ms
Lag by 5% .. 15 %
Reproducibility ≤ 2% 3) 4)
SICK proximity sensor IME08-02BPOZT0S temperature drift (Sr) ± 10%
Electromagnetic compatibility according to EN 60947-5-2
Continuous current Ia ≤ 200 mA
Short circuit insurance?
SICK proximity sensor IME08-02BPOZT0S polarity reverse protection?
Power on pulse protection?
Shock and vibration resistance 30 g, 11 ms/10 Hz... 55 Hz, 1 mm
SICK proximity sensor IME08-02BPOZT0S operating environment temperature -25 ° C...+75 ° C
SICK proximity sensor IME08-02BPOZT0S shell material metal, brass nickel plating
Material, sensing surface plastic, plastic
Shell length 50 mm
Available thread length 34 mm
Maximum tightening torque Typ. 5 Nm
UL Document Number NRKH.E181493
SICK proximity sensor IME08-02BPOZT0S1 is at Ia max
2) No load
3) Ub and Ta are stable
4) From Sr
reduction factor
Please note that these data are for reference only and may have deviations
SICK is approachingsensorIME08-02BPOZT0S Steel St37 (Fe) 1
Stainless steel (V2A) approximately 0.8
Aluminum (Al) is approximately 0.45
SICK proximity sensor IME08-02BPOZT0S copper (Cu) approximately 0.4
Brass (Ms) approximately 0.4

SICK products include: SICK sensors, SICK proximity sensors, SICK photoelectric sensors, SICK safety switches, SICK fluid sensors, SICK flow sensors, SICK magnetic cylinder sensors, SICK encoders, SICK automatic gratings, SICK distance sensors, SICK measuring devices, SICK detection solutions, etc!
SICK sensor WL12-3P2451 is not only very convenient from product design and construction to actual installation! The storage space for SICK sensor WL12-3P2451 does not need to be very large, and the packaging of SICK sensor WL12-3P2451 does not require large boxes for express delivery! We sincerely supply every SICK sensor WL12-3P2451 product! SICK sensor WL12-3P2451 offers discounted product pricing! Hope more customers come to consult and learn about SICK sensor WL12-3P2451!
Sick China was established in 1994 and is one of the important branches of SICK in Asia. After years of development and accumulation, SICK China has become an influential supplier of intelligent sensor solutions, with products widely used in various industries including packaging, food and beverage, machine tools, automobiles, logistics, transportation, airports, steel, electronics, textiles, and more.SICK Encoder Jiangxi