SFW6110 automatic lifting floodlight work light

The lifting work light consists of five major components: lighting fixtures, pneumatic lifting components, generator components, control components, and walking bracket components.

（1） The lighting components mainly use four 500 watt lamps centrally fixed on the lamp panel, which can be easily disassembled and adjusted up, down, left, and right to achieve various angle lighting in a large area;

The main technical parameters of lighting fixture components are:

1. Working voltage 220 volts;

2. Lamp power 4x500 watts;

3. The average service life is 2000 hours;

4. The weight is about 5 kilograms.

（2） The pneumatic lifting rod component adopts a four strength aluminum alloy lifting rod with a lifting height of 4.5 meters. It is lifted by a dedicated air pump to achieve large-area lighting;

1. Minimum height of 1.25 meters;

2. Raise to a height of 4.5 meters;

3. Rise time ≤ 40 seconds;

4. Descent time ≤ 50 seconds;

5. The weight is about 15 kilograms.

（3） The engine components use EC2500CX Honda generators. When using the generator as a power source, the generator set can work continuously for up to 13 hours with full fuel. In situations where there is mains power, it can be directly used to meet long-term lighting needs;

The main technical parameters of the generator components are:

1. Rated output voltage of 200 volts/50 hertz;

2. The generator can work continuously for 13 hours when filled with fuel at once;

3. Dimensions: 1850x500x840mm;

4. Startup method: manual startup;

5. Type: Four stroke air-cooled type;

6. The noise level is less than 65 decibels at a distance of 7 meters;

7. The generator components weigh approximately 65 kilograms.

（4） The control components are composed of a wireless controller and a receiving system. The wireless remote control can be used to control the on and off of each lamp within a range of 50 meters;

（5） The walking bracket components adopt universal wheels, which can be easily moved on uneven gravel roads with pits and dust. Rail wheels can also be optionally installed according to user needs to meet the operation on rails, making it convenient and safe;

This work light can be equipped with a triangular bracket that can be selected according to the user's specific usage situation to meet the separation of the generator and lighting components.