Rust characteristic tester using constant humidity chamber method

Rust characteristic tester using constant humidity chamber method

●Brief introduction:

1）Complies with ASTM D1748 and IP366 standards; 2) Stainless steel rotary table with a speed of 0.33rpm; 3) At a working temperature of 48.9℃The adjustment accuracy of time is ± 0.5℃；
● Technical features:
1) Complies with ASTM D1748 and IP366 standards;
2) The instrument is vertical and includes a stainless steel bath pot and a rotating machinery. There is a control box on the side that includes electronics;
3) Stainless steel structure with ceramic coating, vertical, with rotating arm;
4) Stainless steel bath pot with faucet pipe and valve;
5) Equipped with an automatic water level adjustment device;
6) Stainless steel heater, dedicated switch can be used for auxiliary heater;
7) The circular diffuser is equipped with 20 air scattering nuclei made of alumina;
8) The air supply system includes a nozzle, filter, pressure regulator, 0-400 kPa dial, high-precision 250 mm flow meter (scale range 0-1200 l/h), glass tower, and optional built-in air pump;
9) Stainless steel rotary table with a speed of 0.33rpm. Externally fixed gear reduction motor;
● Ordering information:
1) AD1748-100: Rust characteristic tester using constant humidity chamber method;
Accessories
2) AD1748-A00: Optional water level regulation system;
3) AD1748-A01: Built in air pump;
4) CAL001: PT100 simulator;
5) CAL002: Officially certified PT100 simulator;