-
E-mail
lymzhangwei@126.com
-
Phone
18913021007
-
Address
Nanjing Baibaiqiao Development Zone
Product Categories
Nanjing Nanlan Environmental Protection Equipment Manufacturing Co., Ltd
Rotary grid cleaning machine model
NegotiableUpdate on 03/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The rotary grid cleaning machine model features a rake chain that immerses the lower part of the machine into the ditch at the water inlet. As the water flows through the rake chain gap, it intercepts the pollutants in the water. Under the action of the deceleration drive and transmission mechanism on the upper part of the machine, the rake chain moves slowly and steadily in a certain direction (with the intercepted pollutants facing upwards) to lift the intercepted substances out of the water surface. The liquid passes smoothly through the rake chain gap and enters the next treatment process.
Product Details
Rotary grid cleaning machine modelThe rotary grid cleaning machine is assembled into a set of rotating grid chains by a type of rake teeth. Driven by the reducer, the rake chain rotates in the opposite direction of the water flow. When the rake chain is moved to the upper part of the equipment, due to the guidance of the groove wheel and curved rail, relative self-cleaning motion occurs between each set of rake teeth, and the vast majority of solid materials fall down by gravity. The other part relies on the reverse movement of the self-cleaning device to clean up the debris stuck to the rake teeth. According to the direction of water flow, the rake chain is similar to a grille, and the clearance between the rake teeth assembled on the rake chain shaft is selected according to the usage conditions. When the rake teeth separate the solid suspension in the fluid, it can ensure smooth flow of water.
Product features of rotary grille cleaning machine
The biggest advantage of this equipment is its high degree of automation, high separation efficiency, low power consumption, no noise, and good corrosion resistance. It can ensure continuous and stable operation without supervision and is equipped with overload safety protection devices. In the event of equipment failure, it will automatically shut down, which can prevent the equipment from working under overload. This device can adjust the operating interval of the device according to user needs, achieving periodic operation; It can be automatically controlled based on the liquid level difference before and after the grille; And it has manual control function for easy maintenance. Users can choose freely according to different job needs.
Due to the reasonable structural design of the device, it has strong self-cleaning ability during operation and will not cause blockage, so the daily maintenance workload is minimal.
Rotary grid cleaning machine modelIf it exceeds 1800mm, it will be made into a parallel connection. The clearance of the rake teeth is divided into various specifications such as 1mm, 3mm, 5mm, 10mm, 20mm, 30mm, 40mm, 50mm, etc. The selection is based on the amount of water, lifting height, total solid-liquid separation, and the shape and particle size of the separated material. Different materials are also selected.
