Reflective probe with small probe

NegotiableUpdate on 03/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

FCR-7xx200-2-1, 5/2, 5x100 is a reflective probe with a small probe used to obtain spectral information from diffuse or specular reflection materials.

Product Details

This type of probe has been used in many medical fields. The light from the illumination source is coupled into a fiber bundle consisting of six optical fibers through a standard SMA905 connector, which are directly connected to the end of the probe.

The reflected light on the surface of the sample enters the 7th optical fiber. This optical fiber transmits spectral data to the spectrometer through the SMA905 connector.

The specially designed angle fiber optic bracket (AFH-15) for 1.5mm diameter reflective probes is very useful, as it enables the reflective probe to perform reflection measurements at 15o, 30o, 45o, 60o, 75o, and 90o. For more detailed information, please refer to the Reflective Probe Bracket section.

Technical data

Fiber optic bundle	7 fiber optic cables with a core diameter of 200 μ m, including 6 illumination fibers and 1 detection fiber, N.A.=0.22. The standard length is 2 meters, and the splitter is located in the middle of the fiber optic cable
wavelength range	200-800 nm (UV/VIS) or 350-2500 nm (VIS/NIR) or 250-2500 nm (UV/VIS/NIR)
fiber optic connector	SMA905 connector (2 pieces)
Probe tip	Stainless steel cylinder, 100mm (length) x 1.5mm or 2.5mm (diameter)
Fiber optic conduit	The optical fiber is protected by a Kevlar reinforced PTFE tube with a PVC sleeve, with an outer diameter of 3.8 mm
Operating Temperature	-20 º C to 65 º C
bend radius	Zui small bending radius: short time (a few seconds) 20mm, long time: 120mm